Pioneer AS-WL300 Getting Started Manual

Also see for AS-WL300: Getting started guide Getting started guide Getting started Getting started

Contents

e This guide explains the usage of and necessary settings for this unit. Pleasefollow the procedure to complete the settings. Do not lose this guide.e Refer to the USER'S MANUAL found on the supplied CD-ROM or on theWeb for details of other settings and uses not explained in this guide.Refer to "The USER'S MANUAL" on the reverse for more details.e Some Pioneer products that connect to this product will need to beconfigured. Refer to their respective USER'S MANUAL for more details.e For technical enquiries regarding this product, refer to "Please Read First"for Support Centre details.FeaturesConnect the following Pioneer A V devices using aWireless LAN.AV RECEIVER Blu-ray Disc playerWireless LAN Converter(this unit)Connect supported AV deviceseasily over a Wireless LANusing this unit.Wireless LAN router(base)ADSL modemONU (Optical Network Unit)Wired router. etc.Setup ProcedureSTEP3Check the Base* Check that the base has no problem connecting tothe Internet.Connect the Unite If the base has a WPS button~Follow the instructions in "Step 2 Connect the Unit(WPS)" to connect the unit to the base.e If the base does not have a WPS button~Follow the instructions in "Step 2 Connect the Unit(Manual)" to connect the unit to the base.* If you have problems using the "WPS Button."use the "Manual" procedure.Step 3 Connect AV DevicesPreparationPrepare the following.D Wireless LAN Converter (this unit)D LAN/USB feeder cable (included) * This cable is a combination of aLAN cable and a USB feeder cablethat supplies power to the unitwithout using an AC adapter.Use the supplied cable only.D Getting Started (this guide)D Supported AV device, computer (not included)D Internet connection (not included)Part NamesFront Back Side1 ICD®® ®® ®CD POWER indicator ® POWER connector 0) RESET button® WPS indicator @ ETHERNET port@ WIRELESS indicator ® WPS buttonBefore Configuring the Unite If you do not have an Internet connection, subscribe beforeconfiguring the unit.e Do not connect the LAN/USB feeder cable to a USB hub.STEP1 Check the Base0 Check that the Wireless LAN router (base) has noproblem connecting to the Internet.0Modem Wireless LAN rou•:t:e:r"111•~;;~-(base) ComputerThis procedure requires a separate Wireless LAN router (base).If you do not have a base. please prepare one.Check that the base has a WPS function. Refer to theWireless LAN router user's manual for details.WPS is a function that configures the base connection and securityusing a button.• Some bases have WPS written on them.~ If the base has a WPS buttonContinue to "Step 2 (WPS)" and "Step 3" ...... If the base does not have a WPS buttonContinue to "Step 2 (Manual)" and "Step 3".