|
SX-316-S 915 6 7 85 6 7 8CDFABEDisplay1 SIGNAL indicatorsLights to indicate the type of input signalassigned for the current component:SP AEONRDS1 2 3 4 5 6 7 11 128 9 1013 16 1715 1814 192 DIGITALLights when a Dolby Digital 1 encodedsignal is detected.ANALOGLights when an analog signal is detected.DTSLights when a DTS 2 encoded audio signalis detected.2When the STANDARD mode of the receiver ison, this lights to indicate decoding of a DTSmultichannel signal.3 2 DIGITALWhen the STANDARD mode of the receiver ison, this lights to indicate decoding of a DolbyDigital multichannel signal.4 2 PRO LOGIC IIWhen the (STANDARD) Pro Logic II mode ofthe receiver is on,2 PRO LOGIC II lights toindicate Pro Logic II decoding (see Listening insurround sound for more on this).5 VIR. SBLights during Virtual surround backprocessing.6 DIRECTLights when source direct playback is in use.Direct playback bypasses the tone controls forthe most accurate reproduction of a source.7 AUTO SURR.Lights when the Auto Surround feature isswitched on (see Auto playback).8 ATTLights when ANALOG ATT is used toattenuate (reduce) the level of the analog inputsignal.9 SLEEPLights when the receiver is in sleep mode.DIGITALLights when a digital audio signal isdetected.10 Tuner indicators/ MONOLights when the mono mode is set usingthe MPX button./ STEREOLights when a stereo FM broadcast is beingreceived in auto stereo mode./ TUNEDLights when a broadcast is being received.11 Speaker indicatorShows if the speaker system is on or not. SPAmeans the speakers are switched on. SPmeans the headphones are connected.12 EON/RDS indicatorsEONLights when the EON mode is set, andflashes during an EON broadcast. Theindicator lights when the current stationcarries the EON service.RDSLights when an RDS broadcast is received.13 Character display14 ADV.SURR. (Advanced Surround)Lights when one of the Advanced Surroundmodes has been selected.15 WMA9 ProLights to indicate decoding of a WMA9 Prosignal.16 MIDNIGHTLights during Midnight listening.17 D.E.Lights when Dialog Enhancement (DIALOG E)is switched on.18 LOUDNESSLights during Loudness listening.19 Master volume levelShows the overall volume level. ---dB indicatesthe minimum level, and - 0 dB indicates themaximum level.SX-316-S/MYXJ5 PreviousNext |