Pioneer PRS-D1100M Owner's Manual

Also see for Premier PRS-D1100M: Owner's manual Service manual

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS êìëëäàâ8Connecting the Speaker OutputTerminals1. Expose the end of the speaker wiresusing nippers or a cutter by about10 mm (3/8 inch) and twist.2. Attach lugs to speaker wire ends.Lugs not supplied.• Use pliers, etc., to crimp lugs to wires.3. Connect the speaker wires to thespeaker output terminals.• Fix the speaker wires securely with the termi-nal screws.Using the Speaker InputConnect the car stereo speaker outputwires to the amplifier using the suppliedspeaker input wire with RCA pin cord.• Slide the input switch to the right.7 Connections when using the speakerinput• As a result of connecting the car stereo speakeroutput wire to the amplifier, the power of theamplifier is turned on automatically when the carstereo is turned on. It is not necessary to connectthe system remote control wire in this case.• In the case the amplifier and head unit are con-nected using a speaker input wire with RCA pincord, the amplifier power is only turned on whenone amplifier is being used. If two or more ampli-fiers are synchronously connected in combina-tion, connect the head unit and all of the ampli-fiers with the system remote control wire.Note:• Connect the system remote control wire when thepower of the amplifier is not to be turned onwhen the car stereo is turned on.10 mm(3/8 inch)TwistSpeaker wireLugSpeakeroutputterminalTerminal screwSpeaker wireSpeakeroutputCar StereoSpeaker inputwire with RCApin cordTo RCA inputjack of this unit.White: Black: Black: Red:Left + Left ≠ Right ≠ Right +

/ 49

This manual is suitable for:

Premier PRS-D1100M

Pioneer PRS-D1100M Owner's Manual

Product

Learn More

Legal