Pioneer PRS-D1100M Owner's Manual

Also see for Premier PRS-D1100M: Owner's manual Service manual

13InstallationCAUTION• Do not install in:—Places where it could injure the driver or pas-sengers if the vehicle stops suddenly.—Places where it may interfere with the driver,such as on the floor in front of the driver’sseat.• Make sure that wires are not caught in the slidingmechanism of the seats, resulting in a short-cir-cuit.• Confirm that no parts are behind the panel whendrilling a hole for installation of the amplifier.Protect all cables and important equipment suchas fuel lines, brake lines and electrical wiringfrom damage.• Install tapping screws in such a way that thescrew tip does not touch any wire. This is impor-tant to prevent wires from being cut by vibrationof the car, which can result in fire.• DO NOT allow amplifier to come into contactwith liquids due to, for example, the locationwhere the amplifier is installed. Electrical shockcould result. Also, amplifier and speaker damage,smoke, and overheating could result from contactwith liquids. In addition, the amplifier surface andthe surface of any attached speakers couldbecome hot to the touch and minor burns couldresult.• To ensure proper installation, use the suppliedparts in the manner specified. If any parts otherthan the supplied ones are used, they may damageinternal parts of the amplifier, or they maybecome loose causing the amplifier to shut down.• Never replace the fuse with one of greater valueor rating than the original fuse. Use of an improp-er fuse could result in overheating and smoke andcould cause damage to the product and injuryincluding burns.CAUTION:To prevent malfunction and/or injury• To ensure proper heat dissipation of the amplifier,be sure of the following during installation.—Allow adequate space above the amplifier forproper ventilation.—Do not cover the amplifier with a floor mat orcarpet.• DO NOT allow amplifier to come into contactwith liquids due to, for example, the locationwhere the amplifier is installed. Electrical shockcould result. Also, amplifier and speaker damage,smoke, and overheating could result from contactwith liquids. In addition, the amplifier surface andthe surface of any attached speakers couldbecome hot to the touch and minor burns couldresult.• Do not install the amplifier on unstable placessuch as the spare tire board.• The best location for installation differs with thecar model and installation location. Secure theamplifier at a sufficiently rigid location.• Make temporary connections first and check thatthe amplifier and the system operate properly.• After installing the amplifier, confirm that thespare tire, jack and tools can be easily removed.

/ 49

This manual is suitable for:

Premier PRS-D1100M

Pioneer PRS-D1100M Owner's Manual

Product

Learn More

Legal