Pioneer PRO-1000HDI Service Manual

PRO-1000HDI 1535 6 7 85 6 7 8CDFABEGSO: Outputting data on OPTION items of the menu mode / Integrator menu• Data are output according to the transmission order and size in the table below.• This command is valid only in Normal Operation mode, RS-232C Integrator Adjustment mode, and RS-232C Factory adjustment mode.(Note 1) Dummy data (*) are output when a SLOT manufactured by Pioneer is connected.Order Data Contents Size Output Remarks1 POWER CONTROL 3 byte Same as the RS-232C command2 OSD display 1 byte 0: OSD display prohibition1: OSD display permission3 FULL MASK 3 byte Display a RS-232C commandof currently set MASK4 R SIDE MASK LEVEL 3 byte Adjustment value5 G SIDE MASK LEVEL 3 byte Adjustment value6 B SIDE MASK LEVEL 3 byte Adjustment value7 MASK CONTROL 1 byte 0: OFF, 1: ON8 ORBITER MODE 1 byte 0: OFF, 1: ON9 INVERSE MODE 1 byte 0: OFF, 1: ON10 COLOR MODE 1 byte 1: COLOR MODE12: COLOR MODE211 MIRROR MODE 1 byteX: Right and left invertingY: Top and bottom invertingZ: Top/bottom and right/left invertingN: OFF12 FAN CONTROL 1 byte A: AUTOM: MAX13 MONITOR NAME 12 byte14 SLOT INPUT 1 byte0: VIDEO (RGB)1: COMPONENT12: COMPONENT2(Note 1)15 TEMPERATURE 3 byte A/D input value (Note 2)16 HOUR METER 5 byte Unit : H17 KEY LOCK 1 byte 0: Lock release1: Lock