46EnBASIC OPERATIONMaking Settings with the Setup NavigatorMain unit Use the cursor buttons (5/∞) toselect the amplifier’s 96 kHzcompatibility, then press theENTER button.• No: Select this when the amplifierconnected to the player is not 96 kHzcompatible. When this is selected, the96 kHz signals are down-sampled to48 kHz before being output from thedigital output jack.• Yes: Select this when the amplifier orD/A converter connected to the playeris 96 kHz compatible. When this isselected, 96 kHz linear PCM signalsare output from the digital output jack.Note however that it is not possible tooutput 96 kHz digital audio signals fromsome discs recorded in 96 kHz.• Don’t know: Select this if you do notknow whether the amplifier connectedto the player is 96 kHz compatible ornot. When this is selected, the 96 kHzsignals are down-sampled to 48 kHzbefore being output from the digitaloutput jack.Setting the type of amplifier to be connected (amplifier’s 96 kHzcompatibility)Here set whether or not the amplifier connected to the player is 96 kHzcompatible. When an option is selected, 96 kHz or 48 kHz (96 kHz=48 kHz)linear PCM audio is set automatically.Remote control unitENTERCursorbuttons41e 8 E 73 ¡¢ENTERCursorbuttonsiSetup NavigatorAudio1 GeneralLanguage OtherVideo2Move ExitSETUPSelectENTERDon't KnowYesNoDigital jack not compatible with 96 kHz96 kHz PCM AudioAmp Connection
