Pioneer PDR-W839 Operating Instructions Manual

Also see for PDR-W839: Quick start guide Operating instructions Service manual Quick start guide

Contents

154 Getting StartedEnPlaying a CDThis section takes you through using the basic playback controls ofthe CD changer and CD-R. The steps below describe playing a discin tray 1 of the disc changer, but the playback controls for the CD-Rand for other discs loaded into the changer work in the same way.1 If the recorder isn't already on, pressPOWER to switch on.The display lights up.2 Press OPEN/CLOSE 10 (front panelonly) to eject the CD changer disctray.• To open the CD-R tray, press OPEN /CLOSE 0 on theright-hand side of the unit.Place a CD, with the label face up, on to the disc tray,making sure that it is seated properly in the disc guide.Note: Don’t use an adapter when playing 8cm CD-singles.The disc tray has guides for both 12cm and 8cm discs.3 Press OPEN/CLOSE 10 again toclose the disc tray.4 Press DISC 1 (CD SELECT 1 on thefront panel) to start playback.• For CD-R playback, press CD -R on the remote control(6 on the front panel).• If the disc contains CD text, the CD TEXT indicator lightsup and the entire disc title automatically scrolls across thedisplay. The first 12 characters of the disc title will remain inthe display. You can switch information displays by pressingDISPLAY (DISPLAY /CHARA when using the CD-R). Seepage 24 for more on CD text.5 To pause playback, press 8 (6 onthe front panel). To resume playback,press again.6 To fast-reverse or fast-forward, pressand hold 1 or ¡ (41 or¡ ¢ on the front panel).Release to resume normal playback.If you reach the end of the disc while pressing ¡(¡ ¢), the display shows DISC END and the recordergoes into play-pause mode (you can still reverse-search).7 To skip back or forward to anothertrack, press 4 or ¢ (41 or¡ ¢ on the front panel).Pressing ¢ (¡ ¢) once skips to the start of thenext track on the disc. Further presses take you tosubsequent tracks.Pressing 4 (41) once takes you to the beginningof the current track. Further presses skip to the start ofprevious tracks.You can use the track skip buttons while the disc is pausedor stopped, too. The track number changes while the discremains paused/stopped.8 To skip directly to another track, pressthe corresponding number button.• For track numbers 1 to 10, use the corresponding number.• For track numbers over 10, press the >10 button, then enterthe track number. For example, to select track 20 press >10,2, then 10/0.9 To stop playback, press 7.If the disc was paused, then the pause mode is canceled.TIMEDISC 1 DISC 2 DISC 3MARKDISPLAY/CHARA7 81 ¡34 ¢ABC DEFGHI MNOJKLPQRS TUV WXYZ1 2 34 5 67 8 910/0 >103 - COMPACT DISC MULTI CHANGER COMPACT DISC DIGITAL RECORDER◊ÛB¿ˆ˘≤/COMPACT DISC RECORDER / MULTI-CD CHANGERLegatoLinkConversionCD TEXTCD SELECTCOPY CONTROLOPEN/CLOSE132POWER— OFF _ ON3-CD CONTROL132OPEN/CLOSE6 70004 1 ¡ ¢6 70DISPLAY DISPLAYCHARACTER4 1 ¡ ¢3-CD changer controls CD-R controls