Pioneer PDR-W839 Operating Instructions Manual

Also see for PDR-W839: Quick start guide Operating instructions Service manual Quick start guide

Contents

144 Getting StartedEnQuick CD recordingAlthough the PDR-W839 has many advanced recording features,duplicating a CD is pretty much a one-touch operation. Beforestarting, make sure that the recorder is connected to your ampliferand that everything is plugged in to a power outlet.For detailed information on other recording features, see chapters5, 6, 8, and 9.1 Press the POWER button to switchon.The display lights up.2 Press OPEN/CLOSE 10 to eject the3-CD changer disc tray.Place the CD you want to copy, with the label face up, on tothe disc tray, making sure that it is seated properly in thedisc guide.Note: Do not use an adapter with 8cm CD-singles. Thedisc tray has guides for both 12cm and 8cm discs.3 Press OPEN/CLOSE 10 to close thedisc tray.4 Press OPEN/CLOSE 0 to eject theCD-R disc tray.Place a blank CD-R or CD-RW disc, with the label/non-recording side face up, on to the disc tray. Again, makecertain that it is seated correctly in the disc guide.Be careful when handling CD-R and CD-RW discs not toleave fingerprints on the recording surface.5 Press OPEN/CLOSE 0 to close thedisc tray.The recorder reads the disc to see what you've loaded. After afew seconds it should tell you that you’ve loaded aNEW DISC.6 Press CD= CD-R START (REC THIS).The recorder automatically copies at double speed, so ifyou're listening to the recording as it's being made it willsound a little strange!After the CD in the changer has finished playing, therecorder will finalize the CD-R to make it playable on mostordinary CD players (for more information on this process,turn to page 8). This process takes just a few minutes afterthe CD has been copied.Remove the disc from the recorder before switching off.3 - COMPACT DISC MULTI CHANGER COMPACT DISC DIGITAL RECORDER◊ÛB¿ˆ˘≤/COMPACT DISC RECORDER / MULTI-CD CHANGERLegatoLinkConversionCD TEXTREC VOLSTARTREC THISCD=CD-RPUSH ENTEROPEN/CLOSE1POWER— OFF _ ONOPEN/CLOSE¶0 0Setting the headphone levelYou can set the headphone level so that the output is relativelylouder or softer.1 Press MENU/DELETE.2 Turn the jog dial until H.P. LEVELappears in the display, then press toENTER.The display shows the current level: H (high), or L (low).3 Turn the jog dial (4 and ¢ onthe remote)to change the level.4 Press the jog dial (ENTER) to confirmthe new level.Recording tracks during playbackYou also have the option of choosing to record the track that’scurrently playing in the changer. Make sure there is a CD-R or CD-RW in the recorder, then simply press CD= CD-R START (RECTHIS) while the track is playing, and the CD changer will jump tothe beginning of the track and the CD-R starts recording. Therecorder stops automatically at the end of the track.TIMEENTERMENU/DELETE4 ¢RECTHIS