Pioneer PDP-503CMX Product Training Manual

Also see for PDP 503CMX: Technical manual Quick reference parts lists Service manual Operating instructions Technical manual

42Controls and Connectors~=-LAC INLETOFF ONSPEAKER8Ω ~16Ω+ —@! # $ % ^AUDIOINPUT5 INPUT3 S-VIDEOR LDIGITAL RGBAUDIO INPUT4 VIDEO OUTPUTR L1 2 3 4 5 6 7 89 0IN OUTCONTROL COMBINATIONIN OUTRS-232CANALOG RGB (ANALOG RGB)INPUT1 OUTPUT G B R HD VD(ON SYNC) (H/V SYNC)Ô75 2.2Ω kΩINPUT(INPUT1/2)OUTPUTR SPEAKER8Ω ~16Ω+ —INPUT2 AUDIOConnection PanelPlasma Display Section1 SPEAKER (R) terminalFor connection of an external right speaker.Connect a speaker whose impedance is 8 -16 Ω.2 CONTROL IN/OUT (monaural mini jacks)For connection of PIONEER components that bearthe Î mark. Making CONTROL connection enablescontrol of the main unit as a component in asystem.(NOTE) The main unit cannot be operated by thewired remote control RV-V107.3 COMBINATION IN/OUTUsed when a number of sets are controlledcollectively. (See “5.6 Combination Connection”)Please use a mini DIN 6 pin cable (straight, fullyconnected) available on the market as theconnecting cable.(NOTE) It has no ABL linking function. And it is notcompatible with the RM-V4000V or othermulti-projection. It is not output when themain power is off.4 RS-232CThis terminal is used for adjustments by a PC (EIA-232-F standard).(See “5.5 RS-232C Adjustment Mode”)5 INPUT1 (mini D-sub 15 pin)For connection of components that have RGB orcomponent output jacks such as a personalcomputer, DVD player, or external RGB decoder.6 OUTPUT (INPUT1) (mini D-sub 15 pin)Use the OUTPUT (INPUT1) connector to output thevideo signal to an external monitor or othercomponent.(NOTE) • The video signal will not be output fromthe OUTPUT (INPUT1) connector whenthe main power of this display is off or instandby mode.• When connecting the main units in aseries, please set the number that can beconnected as a total of 5 including the setthat the signal is initially input to. But acondition for performing separate sink orcomposite sink input and output is thatthe sink level of the source used is atleast TTL level at 2.2kΩ terminal time.