62En04 Additional Picture and Sound Adjustment OptionsThe multi-screen function is unavailable when viewing source from a single input or from twoexternal inputsources.To return to a single picture, press EXIT.Another option is to select a multi-screen mode from the TOOLS Menu. To select a multi-screen mode, follow thesteps below.1 ) Press TOOLS.The TOOLS Menu screen appears.2 ) SelectSplit, Swap orShift from the menu.Use the arrow buttons to highlight an option (then press ENTERif you select Swap).3 ) Select a mode.Select Off, 2-screen or P-in-P for the Split mode. The selected mode is displayed in the center of the TOOLSMenu.4.5 Freeze the PictureDuring fast-action sequences or detailed pictures, try capturing the image with the FREEZE option. FREEZEallows you to better understand the action or picture details if desired. To freeze a picture from a TV broadcast ormovie, follow the steps below.1 ) Press FREEZE to create a still image picture (copy)of the currently showing image.The copy appears to the right of the still-movingvideo sequence thus splitting the screen.2 ) Press FREEZE again to release the image.The frozen image disappears, returning the pictureto a single screen with the video sequence still inprogress.• With the screen split, an image cannot be frozen.A warning message appears if you attempt to use this function when there is already a frozen image onscreen. If an image is left frozen on the screen, the panel automatically releases the image after five minutes.Note: Using FREEZE for an extended period may cause an after-image..Press SPLITto cycle through thedifferent multi-screen views.Press SWAPto switch the positionof the two screens.Press SHIFTto move the position ofthe small screen counter-clockwise.Warning: Displaying pictures in multi-screen modefor an extended period may cause an after-image.
