En EnPIONEER CORPORATION4-1, MEGURO 1-CHOME, MEGURO-KU, TOKYO 153-8654, JAPANPIONEER ELECTRONICS (USA) INC.P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.TEL: (800) 421-1404PIONEER EUROPE NVHaven 1087, Keetberglaan 1, B-9120 Melsele, BelgiumTEL: (0) 3/570.05.11PIONEER ELECTRONICS ASIACENTRE PTE. LTD.253 Alexandra Road, #04-01, Singapore 159936TEL: 65-6472-7555PIONEER ELECTRONICS AUSTRALIA PTY. LTD.178-184 Boundary Road, Braeside, Victoria 3195, AustraliaTEL: (03) 9586-6300PIONEER ELECTRONICS OF CANADA, INC.300 Allstate Parkway, Markham, Ontario L3R 0P2, CanadaTEL: 1-877-283-5901PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.Blvd. Manuel Avila Camacho 138 10 pisoCol. Lomas de Chapultepec, Mexico, D.F. 11000TEL: 55-9178-4270Published by Pioneer Corporation.Copyright © 2007 by Pioneer Corporation.All rights reserved.Publicado por Pioneer Corporation.Copyright © 2007 Pioneer Corporation.Todos los derechos reservados.Printed in JapanImpreso en Japón E <07D00000>Digital Parking Assistance CameraCámara digital de auxilio de estacionamientoOwner’s ManualManual del PropietarioND-BC20PAThis device complies with Part 15 of the FCCRules.Operation is subject to the following twoconditions:(1) This device may not cause harmful interference,and (2) this device must accept any interferencereceived, including interference that may causeundesired operation.Information to UserAlteration or modifications carried out withoutappropriate authorization may invalidate the user’sright to operate the equipment.If you want to dispose this product, donot mix it with general household waste.There is a separate collection system forused electronic products in accordance withlegislation that requires proper treatment,recovery and recycling.Private households in the member states of the EU,in Switzerland and Norway may return their usedelectronic products free of charge to designatedcollection facilities or to a retailer (if you purchase asimilar new one).For countries not mentioned above, please contactyour local authorities for the correct method ofdisposal.By doing so you will ensure that your disposedproduct undergoes the necessary treatment, recoveryand recycling and thus prevent potential negativeeffects on the environment and human health.WARNING:Handling the cord on this product or cords associatedwith accessories sold with the product may exposeyou to chemicals listed on proposition 65 known tothe State of California and other governmental enti-ties to cause cancer and birth defects or other repro-ductive harm. Wash hands after handling.IMPORTANTSAFEGUARDSDo not wash your car with an automatic car washor high-pressure water as it may result in waterentering the camera or the camera falling off.Do not attempt to heat the surface of the cameralens or camera lens itself with a lighter and so onwhen they have become frozen. This can cause amalfunction.This product is a rear view camera for checkingthe view at the rear of a car.A rear view camera is a camera that provides sym-metrical images in the same way as rear and sideview mirrors.•••Connection to a TV with an RCA video input ispossible, but confirm whether the TV you use hasa reverse gear connection function.Direct sunlight or strong light (sunlight reflectedfrom a bumper etc) on the camera may result insmear above and below the location where thelight strikes, but this is not a malfunction.This product is designed to supplement the driv-er’s rear view, but the camera images do not showall dangers and obstacles. Be sure to look behindyou when reversing to confirm the view.Since this product uses a wide-angle lens, objectsnearby appear wider and objects far away appearnarrower, and distance may seem different thanthe actual distance. Always make sure to visuallycheck behind your car when backing up.This product is required to be set individually foreach type of vehicle. When reinstalling this prod-uct on a different car such as after purchasing adifferent car, always make sure to change the set-tings prior to use.Always drive carefully without relying too muchon this product.Check camera stand installation before driving.Are the screws loose?Is the camera stand firmly secured?If the rear view camera comes loose while youare driving it may cause an accident.This device is designed for use ONLY withPioneer unit with rear camera input. Before con-tinuing setup, please confirm you are using the“Reverse mode” to view this screen.Those Pioneer models compatible with the screendisplay (guide, menu, etc.) of this product are aslisted below. When combining with other prod-ucts, the screen display displayed by the combinedproduct may be superimposed on the screen dis-play displayed by this product.•••••••––••What's WhatButton Unit➀➂➃➁➀ MODE ButtonThis is used when changing the screendisplay mode. This is also used to returnto the previous screen or discontinue anoperation on the setup screen.➁ + ButtonThis is used when selecting an item on thesetup screen or when adjusting position orangle.➂ – ButtonThis is used when selecting an item on thesetup screen or when adjusting position orangle.➃ ENTER ButtonThis is used to finalize a display or item onthe setup screen.Preparations BeforeBeginning SetupThe setup procedure for this product consistsof taking photographs of images of the rearview camera when viewed from the locationwhere the rear view camera is installed, andthen setting up the camera based on thosephotographs after moving the vehicle to asafe location provided with tire blocks. Movethe vehicle to the location where photographsare to be taken before beginning the setupprocedure.1. Park the vehicle.Park the vehicle in the center of the parkingspace indicated with the white lines.White lines Center of parkingspace2. Move the vehicle forward.Move the vehicle forward from the locationwhere it has been parked to the locationwhere the photographs are to be taken.Take photographs at the location wherethe white lines cross the dotted lines whilereferring to the photograph above.Note:Perform setup at a parking space having whitelines and tire blocks. The setup will not be correctif the vehicle is not located in the center of theparking space.•First Time SetupAn initial setup is required when using thisproduct for the first time.Begin the setup procedure after parking thevehicle at the location where photographsare to be taken by referring to the section on“Preparations Before Beginning Setup”.1. Put the car in reverse.Note:When performing setup, always make sure to setthe parking brake and step on the brake to makesure the car is stopped.2. Simultaneously press the ENTERand + buttons on the button unit.3. Press the ENTER button four times.4. Take the photograph.Take the photograph to be used for setup.Take the photograph while referring to thesection on “Taking Photographs”.5. Set the basic settings.Set the basic settings in the order of itemsA to F of “Basic Settings” based on thephotograph taken. Make the settings byreferring to “Basic Settings”.6. Select OK and press the ENTERbutton.The initial setup is completed and thesettings are stored in memory.Note:Please make sure to read the caution and thenpress the ENTER button to go to the next step.Photograph data is deleted when setup is ended.This camera and associated electronic guides areintended solely as a driving aid. This unit is nota substitute for you attentiveness, judgement, andcare while driving, moving, or parking your vehi-cle. Always observe safe driving rules and drivinglaws, even if they contradict the unit instructions.••••Taking PhotographsA photograph to be used for setup is taken.(Refer to “First Time Setup” and “ChangingBasic Settings or Other Settings” forinformation to get started with photographingprocedure.)1. Press the ENTER button twice.2. Press the ENTER button again.A photograph of the image of rear viewcamera is taken.3. Press the ENTER button.Press the ENTER button if the photographtaken is satisfactory. Press the MODEbutton to retake the photograph.4. Press the ENTER button twice.5. Move the car to a safe location pro-vided with tire blocks.Move the car from the location wherethe photograph was taken to a locationprovided with tire blocks.Note:Always make sure that the car has come to a com-plete stop and parked after moving.Do not turn off the engine. Photograph data willbe deleted if the engine is turned off.6. Press the ENTER button.7. Press the ENTER button.When performing this procedure startingfrom “First Time Setup”, proceed to step 5of “First Time Setup”.When performing this procedure startingfrom “Changing Basic Settings or OtherSettings”, proceed to step 5 of “ChangingBasic Settings or Other Settings”.••AVIC-Z1 / AVIC-Z2 / AVIC-HD1BT / AVIC-HD3 /AVIC-D3 / AVH-P5900DVD / AVH-P5950DVD /AVH-P7900DVD / AVH-P7950DVDEnENGLISHESPAÑOL
