Pioneer MEP-7000 Operating Instructions Manual

Also see for MEP-7000: Control guide Operating instructions Faq Service manual Driver installation guide

Contents

ABOUT THE DRIVER PROGRAM52En7 Follow the instructions that appear on the screen.• If the [Windows Security] screen appears duringinstallation, click on [Install this driver software anyway]to continue the installation process.• If the [Hardware Installation] screen appears duringinstallation, click on [Continue Anyway] to continue theinstallation process.• If the [Digital Signature Not Found] screen appears duringinstallation, click on the [Yes] button to continue theinstallation process.8 When installation is completed, the [Installation is nowcomplete.] message will appear. Click on the [Finish] buttonto complete the process. Connecting this unit to the computer1 Use the accessory dedicated remote control cables toconnect the drive unit to the control unit.2 Use USB cable to connect the drive unit to the computer,then turn the drive unit’s power ON.When first connecting this unit to the computer, and whendisconnecting and reconnecting the computer USB port, thecomputer may display the message [Installing device driversoftware]. In this case, wait until the computer displays themessage [Your devices are ready to use].• During the installation process, if the computer displays themessage [Can Windows connect to Windows Update tosearch for software?] select [No, not this time], then clickon the [Next] button to continue the installation process.• During installation, if the computer displays the message[What do you want the wizard to do?] select [Install thesoftware automatically (Recommended)], then click onthe [Next] button to continue the installation process.NOTE• Insert firmly until you hear a click.