Pioneer Elite PRO-1000HDI Operating Instructions Manual

Also see for Elite PRO-1000HDI: Service manual Quick reference parts lists

25PRO-1000HDI / PRO-800HDIOperationsOperationsPartial Image Enlargement(POINT ZOOM)This display allows any one of nine screen areas (AREA 1to AREA 9) to be selected and enlarged to x1.5, x2, x3, orx4. When performing point zoom enlargement, thedirection buttons (5/∞/2/3) can be used to move theenlarged portion up-down and right-left.Notes÷ The POINT ZOOM function is supported only when the inputsignal is from a computer.÷ Whenever POINT ZOOM is selected, the screen sizeautomatically changes to FULL.1 Press the remote control unit’s POINT ZOOM.SELECT ZOOMEXITSETP.ZOOM2 Press 5/∞/2/3 as required to select the desiredscreen area (AREA 1 to AREA 9).3 Press SET to select the zoom ratio.Pressing SET repeatedly changes the zoom ratio inthe following order:÷ When the zoom ratio is changed, the screen imageis enlarged based on the screen center.÷ 5/∞/2/3 can be used to move the enlarged portionup-down and right-left.÷ If no operation is undertaken for three seconds ormore, the display screen will disappear.SET or 5/∞/2/3 can be pressed again if desired tochange the zoom ratio or display position.4 Press the remote control unit’s POINT ZOOM onceagain to cancel the point zoom operation.The point zoom function will also be canceledwhenever the input signal changes, the menu screenis displayed, or the INPUT changes.3 x 1.5x 4.0 23 x 2.0x 3.0 2x 4.0x 2.0x 1.5AREA 5x 3.0x 4.0x 2.0x 1.5AREA 8x 3.0x 4.0x 2.0x 1.5AREA 2x 3.0x 4.0x 2.0x 1.5AREA 6x 3.0x 4.0x 2.0x 1.5AREA 9x 3.0x 4.0x 2.0x 1.5AREA 3x 3.0x 4.0x 2.0x 1.5AREA 4x 3.0x 4.0x 2.0x 1.5AREA 7x 3.0x 4.0x 2.0x 1.5AREA 1x 3.0AREA 1 display rangeAREA 4 display rangeAREA 7 display rangeAREA 2 display rangeAREA 5 display rangeAREA 8 display rangeAREA 3 display rangeAREA 6 display rangeAREA 9 display range