Pioneer ELITE PRO-620HD Operation Instruction Manual

Also see for ELITE PRO-520HD: Service manual Service manual

78REMOTE CODE SET UPSAT CONTROL BUTTONSCABLE and SAT cannot be selected at the same time.When SAT is preset by REMOTE CODE SET UP, the remotecontrol unit buttons will function as shown below.•When a satellite broadcast tuner is connected to theMonitor, press the input selector button that has the samenumber as the connected input terminal and set the modeswitch to CBL/SAT/DTV.The tuner can be operated using buttons 1 to 8.•Satellite broadcast tuners which are made by other makersand are not preset can also be operated with the remotecontrol unit if buttons 1 to 8 have learnt the functions(see page 74).1 Direct channel selection buttonsPress the button (or buttons) that corresponds to thechannel that you wish to watch.2 CH (channel) +, – buttonsPress plus (+) or minus (– ) to tune in a higher or lowerchannel.3 SOURCE POWER buttonTurns the power of the SAT (digital satellite system tuner)on and off.4 Select/Set buttons (SET/ENTER, 2, 3, 5, ∞)2, 3, 5, ∞: Press the button to select items on the SATGUIDE screen or SAT MENU screen.SET/ENTER: Press to activate the selected function.5 CH ENTER buttonFix the selected channel with the direct channel selectionbuttons.•Use this button to learn if necessary.6 SAT MENU buttonWhen this button is pressed, the satellite broadcastingmenu screen will be displayed.7 SAT GUIDE buttonWhen this button is pressed, the satellite broadcastingguide screen will be displayed.8 SAT INFO buttonWhen this button is pressed, information on satellitebroadcasting will be displayed.•Use this button to learn if necessary.EDIT/LEARNINPUT1 2 3 4TVSUB CHSELECTFREEZESPLITRECEIVER4¢INPUT8CHRETURNSEARCHVCR RECTVVOLMUTINGFAVORITE CH1 7 3 ¡VOLVOL14758692 30SOURCEGUIDECHENTERSET/ENTER∞52 3SCREENMODEDISPLAYANTDTV/SATINFODTV/(SAT)MENUTV/SAT/DVDMENUDTV/DVD TOPTV CBL/SAT/DTVDVD/LDVCRCH2HDTV PROJECTION MONITORÎMode switch4713586