32En¶ Import-logImport log is a sequential list of all disc slot numbers inwhich discs have been newly inserted into the changerwhen operating in mailslot submode (see p. 34).The slot numbers displayed include the slot numbers notonly for discs which have been added but also discs whichhave been replaced in mailslot submode. Note that discsin normal-type 50-disc magazines which have been addedare displayed as a magazine unit.Press « key≠Press « key≠ContentsContents information of the changer may be retrieved in orderto browse the status of all slots within the changer.Press « key Press » key≠ ±Note that the number displayed under the heading“Uncertain” indicates the number of slots for which thechanger is still uncertain whether the slot is empty or full.Info submodeThe DRM-7000/DRM-3000 stores data needed in order forsystem administrators to perform daily maintenance in non-volatile memories, and info submode may be used to browsethese data.If you press the ENT key at this point, the following menuscreen will appear which makes it possible to select the typeof information to be read.Move the cursor to the type of information you need andthen press the ENT key.LogWhen you select log data browsing, it is possible to chooseeither error-log or import-log data.Move the cursor to either “Error-log” or “Import-log” andpress the ENT key to browse the corresponding log data.¶ Error-logThe Error-log is a recorded history of operating errorsdetected by the changer. Errors are numbered from themost recent (1) up to a maximum of 32.Moving the cursor to an error code and pressing the ENTkey causes a description of the type of error in question tobe displayed.Press the ENT key gain to display detailed data regardingthe type of error.Press the ENT key≠Press the ENT key≠OperationExample of display for DRM-7000Example of display for DRM-7000
