14EnNAMES AND FUNCTIONS OF INDIVIDUAL PARTSFRONT1 20-disc hyper magazine2 Control panel3 Mailslot4 Front access door5 LCD message windowThe backlight to the LCD message window is designed toautomatically go into energy saving mode whenever morethan 1 minute passes without any operations beingperformed from the control panel.6 Operation keysThese keys are used to change the display items on theLCD message window and to select setting fields orvalues. Note that a lock release key is required in order tobecome effective these keys.Escape key (ESC):The escape key is used to step back from the messagelayer currently being displayed (i.e., to return to theprevious display) or to halt operations.|«:This key is used to decrement displayed values or tomove the display cursor down or to the left.»\:This key is used to increment displayed values or tomove the display cursor up or to the right.Enter key (ENT):The enter key is used to step forward from the messagelayer currently being displayed or to initiate a specifiedoperation.FRONT ACCESS DOOR INSIDE1234ESC ENTFUNCTIONLOCKPOWERUNLOCKROBOTICSBUSYDRIVEBUSYMAILSLOTOCCUPIED56789Function key (FUNCTION):The function key must be pressed in order to enter thesystem administrator mode.7 Lock/Unlock key switchInserting a lock release key into this switch and rotating it90 degrees releases the operation lock and makes itpossible to perform operations from the control panel.8 Status indicatorsPOWER:This indicator lights up whenever the power is on.ROBOTICS BUSY:This indicator lights up whenever a disc transportmechanism is in operation.DRIVE BUSY:This indicator lights up whenever one or more discsare being placed on each drives.MAILSLOT OCCUPIED:This indicator lights up whenever a disc is placed in theclosed mailslot.9 Front baysDRM-7000For use with disc magazines: M1 – M7DRM-3000For use with disc magazines: M1 – M3
