Pioneer DEQ-P7050 Operation Manual

Also see for DEQ-P7050: Installation manual

Contents

Audio AdjustmentsEn 9Using the dynamic range controlThe dynamic range refers to the differencebetween the largest and softest sounds. Thedynamic range control compresses this differ-ence so that you can clearly hear sounds evenat low volume levels.1 Press AUDIO to select DRC.Press AUDIO until DRC appears in the display.2 Press 5 to turn the dynamic range controlon.DRC ON appears in the display. Dynamic rangecontrol is now on.• You can turn off dynamic range control bypressing ∞.Notes• The dynamic range control is effective only onDolby Digital sounds.• When playing other than the DVD disc, youcannot switch this mode.Using the dual mono modeWhen playing a disc recorded on a dual monomode, you can select the channel to output.1 Press AUDIO to select D.MONO.Press AUDIO until D.MONO appears in thedisplay.2 Press 2 or 3 to select the desired outputsetting.Press 2 or 3 until the desired output settingappears in the display.L&R (left and right channels)—L ch (left chan-nel)—R ch (right channel)Notes• This function is effective only on dual monomode sound.• When playing other than the DVD disc, youcannot switch this mode.Using the direct controlYou can override audio settings to check foreffectiveness of your audio settings.1 Press AUDIO to select DIRECT.Press AUDIO until DIRECT appears in thedisplay.2 Press 5 to turn the direct control on.DIRECT ON appears in the display. Directcontrol is now on.• You can turn off direct control by pressing ∞.Note• All audio functions are locked out duringDIRECT ON except VOLUME.Using the Dolby Pro LogicDolby Pro Logic gives enhanced spatial anddirectional effects, creating theater-like sense ofpresence and ambience.• If the source is a 2-channel LPCM audio or a2-channel Dolby Digital audio and you selectSFC effects that are most applicable for 5.1-channel audio (i.e., Musical, Drama orAction), we recommend switching Dolby ProLogic on. On the other hand, when selectingSFC effects that are intended for use with 2-channel audio (i.e., Jazz, Hall or Club), werecommend switching Dolby Pro Logic off.English Español Deutsch Français Italiano Nederlands02Section