Pioneer DEH-P6800MP Operation Manual

Also see for DEH-P6800MP: Owner's manual Installation manual Operation manual Operation manual Installation manual

Playing a CD12These are the basic steps necessary to play aCD with your built-in CD player. More ad-vanced CD operation is explained starting onthis page.1 Track number indicatorShows the track currently playing.2 Play time indicatorShows the elapsed playing time of the cur-rent track.1 Press SOURCE to select the built-in CDplayer.Press SOURCE until you see Compact Discdisplayed.# If no disc is loaded in the unit, you cannot se-lect Compact Disc (built-in CD player). Insert adisc in the unit. (Refer to page 11.)2 To perform fast forward or reverse,press and hold c or d.# If you select ROUGH SEARCH, pressing andholding c or d enables you to search every 10tracks in the current disc. (Refer to Selecting thesearch method on page 24.)3 To skip back or forward to anothertrack, press c or d.Pressing d skips to the start of the next track.Pressing c once skips to the start of the cur-rent track. Pressing again will skip to the pre-vious track.Introduction of advancedbuilt-in CD player operation11 Function displayShows the function status.% Press FUNCTION to display the functionnames.Press FUNCTION repeatedly to switch be-tween the following functions:Repeat (repeat play)Random (random play)Scan (scan play)Pause (pause)Comp./BMX (compression and BMX)FF/REV (search method)# To return to the playback display, press BAND.NoteIf you do not operate the function within about 30seconds, the display is automatically returned tothe playback display.Repeating playRepeat play lets you hear the same track overagain.1 Press FUNCTION to select Repeat.Press FUNCTION until Repeat appears in thedisplay.2 Press c or d to select the repeat range.Press c or d until the desired repeat range ap-pears in the display.! DISC Repeat the current discBuilt-in CD PlayerEn22Section06