Pioneer CDJ-850 Operating Instructions Manual

Also see for CDJ-850: Operating instructions Service manual Operating instructions Quick start guide Owner's manual

En22The loop out point’s time is displayed on the main unit display.2 Press [SEARCH m, n] 3.The loop out point can be adjusted in units of single frames.! The same operation is possible using the jog dial.! The loop out point adjustment range is anywhere after the loop inpoint.3 Press [LOOP OUT (OUT ADJUST)] 7.Loop playback resumes.! Loop playback also resumes if no operation is performed for over10 seconds.Canceling Loop playback (Loop Exit)Duriung loop playback, press [RELOOP/EXIT] 6.Playback continues beyond the Loop Out Point without returning tothe Loop In Point.Returning to Loop playback (Reloop)After canceling loop playback, press [RELOOP/EXIT] 6during playback.The track returns to the previously set loop in point and loop playbackbegins.Setting the loop automatically based onthe track’s tempo (Auto Beat Loop)1 Press [BEAT SELECT] 9.Set the number of beats for loop playback. This operation is not neces-sary when selecting 1-beat, 2-beat, 4-beat or 8-beat loop playback.— When 1-beat, 2-beat, 4-beat or 8-beat loop playback is selected,the indicator lights.— When 1/16-beat, 1/8-beat, 1/4-beat or 1/2-beat loop playback isselected, the indicator is turned off.2 In the play or pause mode, press one of the[AUTO BEAT LOOP] buttons a (1, 2, 4 or 8) at theposition at which you want to set the loop.The pressed button flashes, the loop out point is set automaticallyaccording to the track’s tempo (BPM) and the number of beats set instep 1, and loop playback begins.! When one of the [AUTO BEAT LOOP] buttons (1, 2, 4 or 8) ispressed again during auto beat looping, the loop out point isautomatically reset according to the track’s tempo (BPM) and thenumber of beats of the button that was pressed, and loop playbackbegins.Storing cue and loop pointsPCUSBDISCTOUCH / RELEASEVINYLSPEED ADJUSTDISC EJECTSTANDBYBACKBROWSE TAG LIST INFO MENUUTILITY421USBSTOPCUE / LOOP DELETE MEMORYCALLOUT RELOOP/EXITLOOPIN / CUE1 / 41 / 81 /16/REMOVETAG TRACKTIMEMODEAUTOCUEstubcde1 Load an SD memory card/USB device in the CDJ-850.2 Set Cue Point or Loop Point.3 Press [MEMORY] u.[MEMORY] appears on the main unit display. The stored cue pointare displayed on the playing address display. The point information isrecorded on the USB device.! To store loop points, press [MEMORY] during loop playback. Thestored loop points appear on the playing address display.Calling out saved cue or loop points1 Load an SD memory card/USB device in the CDJ-850.2 Load the track whose cue or loop points you want tocall out.Cue and loop points are displayed as marks on the playing addressdisplay.3 Press [CUE/LOOP CALLc/d] s.The playback position is moved to the selected point and paused.! When multiple points are recorded, the point moves each time thebutton is pressed.Deleting cue or loop points individually1 Load an SD memory card/USB device in the CDJ-850.2 Load the track containing the cue point or loop pointsyou want to delete.Cue and loop points are displayed as marks on the playing addressdisplay.3 Press [CUE/LOOP CALLc/d] s.The playback position is moved to the selected point and paused.! When multiple points are recorded, the point moves each time thebutton is pressed.4 Press [DELETE] t.[DELETE] appears on the main unit display and the selected pointinformation is deleted.Deleting all cue and loop points for a disc1 Load a disc in the CDJ-850.2 Load an SD memory card/USB device in the CDJ-850.Cue and loop points are displayed as marks on the playing addressdisplay.3 Press [DISC] e.4 Press [DELETE] t for at least 5 seconds.[DISC CUE/LOOP DATA-DELETE? PUSH MEMORY] appears on themain unit display.5 Press [MEMORY] u.All cue and loop points for the disc currently loaded in the CDJ-850 aredeleted.! The deletion mode is canceled when any button other than[MEMORY] is pressed.Deleting all disc information recorded onthe USB device1 Press [DISC] e.2 With no disc loaded in this unit, press [DELETE] t forover 5 seconds.[DISC CUE/LOOP DATA-DELETE ALL? PUSH MEMORY] appears on themain unit display.