16BDR-XD08EMB-SEnglishFrançaisDeutschItalianoMagyarSvenskaEspañoleštinaPolskaSloveninaEnglishFrançaisDeutschItalianoMagyarSvenskaEspañoleštinaPolskaSloveninaThis unit can be added without shutting down or rebooting the computer. Connect the unit to thesupplied USB cable.1 Confirm that your computer (PC) has an available USB port.2 With your Windows® or Mac operating system running, use the supplied USB cable toconnect this unit to the PC.Caution• Do not disconnect the USB cable during data transfers.• Do not disconnect the USB cable during PC startup or any operation with the unit.DC IN5V DC IN5VComputer(PC)This unitUSB 3.0 portrecommendedUSB 3.0USB cable (supplied)USB Type-Cexchangecable(supplied) USB cable(supplied)Note• Connection to a USB 3.0 port is recommended, since when a USB 3.0 cable is connected to a USB2.0 port, the connection will be limited to USB 2.0 performance standards.• This unit can operate with USB 1.1 but will not provide optimum performance.• Connecting this unit through a USB hub or using unspecified cables may not achieve properoperation.Removal procedureCheck that the status shows that the main unit is not being accessed (the indicator LED is not litbrightly), then remove the USB cable.CAUTIONThis product satisfies EMC regulations when shielded cables and connectors are used to connectthe unit to other equipment. To prevent electromagnetic interference with electric appliances suchas radios and televisions, use shielded cables and connectors for connections.Connection