Pioneer BCS-424 Operating Instructions Manual

Also see for S-BD122: Operating instructions Operating instructions

Contents

Advanced settings 63EnAdvanced settings8 Setting the proxy serverOnly set the proxy server if so instructed byyour Internet service provider.1. Select and set Network d Proxy Serverd Next Screen.Use / to select, then press ENTER.2. Select and set Use or Not use at ProxyServer.Use / to change, then press .y Use – Select this when using a proxyserver.y Not use – Select this when not using aproxy server.If you have selected Use, proceed to step 3.3. Select and set Server Select Method.Use / to change, then press .y IP Address – Input the IP address.y Server Name – Input the server name.4. Input IP Address or Server Name.Use the number buttons (0 to 9) to input thenumber if you select IP address in step 3.Use / to move the cursor.When Server Name is selected in step 3,use the number buttons (0 to 9) to launchthe software keyboard. Now use / / /to select characters and items, then pressENTER to input.5. Input Port Number.Press , then use the number buttons (0 to9) to input the number.6. Press ENTER to set. Displaying the network settings Select and set Network d Informationd Next Screen.Use / to select, then press ENTER.The MAC address, IP address, subnet mask,default gateway and DNS server (primaryand secondary) settings are displayed.When Auto Set IP Address is set to On, thevalues obtained automatically are displayed.Notey [0.0.0.0] is displayed when each IP address hasnot been set. Testing the network connection Select and set Network d ConnectionTest d Start.Use / to select, then press ENTER.[Network is OK.] is displayed once thetest is completed. If any other message isdisplayed, check the connections and/orsettings (pages 33 and 62). Changing to other language atlanguage setting1. Select and set Language.Use / to select, then press ENTER.2. Select and set OSD, Audio, Subtitle orMenuUse / to select, then press ENTER.3. Select and set the desired language.Use / to select, then press ENTER.Notey If a language not recorded on the BD/DVDis set, one of the recorded languages isautomatically selected and played. Erasing data that has been added toBDs and application dataUse this procedure to erase data that hasbeen added to BDs (data downloaded withthe BD-LIVE function and data used withthe BONUSVIEW function) and applicationdata.Cautiony Some time is required to erase the data.y Do not unplug the power cord while data isbeing erased.1. Select and set BUDA d BUDA Setup.Use / to select, then press ENTER.2. Select and set Fmt buda.Press ENTER.