Pioneer AppRadio SPH-DA01 Firmware Updates

Also see for AppRadio SPH-DA01: Operation manual Operation manual Operation manual Important information for the user Installation manual

AppRadio SPH-DA01 Firmware Update Version 2.64 (October2013)This firmware update applies only to AppRadio SPH-DA01 units sold in the United States and Canada andprovides compatibility with an iPhone 4 or iPhone 4S running iOS 7.In order to perform this update, the following items are needed:• Pioneer SPH-DA01 AppRadio Receiver• microSD cardIMPORTANTPlease download and print these AppRadio Firmware Update instructions before downloading and installingthe firmware update. It is very important that you complete all steps correctly and in the order described below.WARNING! This firmware update applies only to AppRadio (SPH-DA01) units sold in the United Statesand Canada that have previously been updated to firmware v2.63.DO NOT perform this firmware update if your AppRadio SPH-DA01 does not already have the firmwareupdate v2.63, released in July 2012, installed.How to determine if the v2.63 firmware update has already been installed:1. From the AppRadio main screen, press the settings ‘gear’ icon in the upper left hand corner, and then selectthe General settings icon.2. Press the Radio icon at the bottom of the General Settings screen.• If the Software Version shows v2.63, the update has already been installed. You can proceed with thev2.64 firmware update as outlined in the steps below.• If the Radio settings screen shows a software version of 2.56 or lower, the v2.63 update must beinstalled first. The v2.63 firmware update and instructions can be foundhere: http://www.pioneerelectronics.com/PUSA/Car/AppRadio/AppRadio+(SPH-DA01)+Firmware+Update+v2.63+(July+2012)wnloadsNote: If you have any difficulty carrying out these instructions or wish to have this update performedby Pioneer, please contact Pioneer Customer Service toll free at (800) 421-1404 during regularbusiness hours (M-F 10:30AM - 7:00PM Eastern Time, excluding holidays) for assistance.A. Downloading the firmware update file1. Download the firmware update byclicking: http://www.pioneerelectronics.com/PUSA/Support/DoOnce you have downloaded the .ZIP file to your computer, locate the file on your computer and double click thefile to decompress it. If you do not have a decompression utility installed on your computer, you can downloadWinZip at http://www.winzip.com (purchase may be required).2. Once the .ZIP file is decompressed, locate and copy the “CE66” folder onto a blank microSD card.*Note: Ensure that the “CE66” folder is located within the root (top) layer of the microSD card. There should bePage 1 of 4

/ 4

Related manuals for Pioneer AppRadio SPH-DA01