Pioneer AVIC-5100NEX Firmware Update Manual

Also see for AVIC-5100NEX: Operation manual Installation manual Installation manual Operation manual

System Firmware Update Instructions for Pioneer AVIC-5100NEX, AVIC-6100NEX, and AVIC-7100NEX In-dash ReceiversIMPORTANTPlease download and print these firmware update instructions before downloading and installing thefirmware update. It is important that you complete all steps correctly and in the order described below. If you install this firmware, all navigation function settings and save data will be formatted todefault settings. Once the update has finished, you will need to reconfigure the settings.In order to perform this update, the following items are needed: Pioneer AVIC-7100NEX, AVIC-6100NEX, or AVIC-5100NEX receiver One of the following storage devices with at least 2 GB of storage capacity- USB storage device- SD card (AVIC-7100NEX only)CAUTION The only USB port that supports the firmware update is USB port 1. USB or SD card should be blank (should not contain any files) and formatted to FAT32. DO NOT turn your unit off or disconnect the SD card or USB storage device while the firmwareis being updated. You can only update the firmware when the vehicle is stopped and the parking brake is engaged.Displaying the firmware versionCheck whether the firmware of your unit needs to be updated by checking the version number of thefirmware.Procedure:1. Press the HOME button to display the Top menu screen.2. Touch the following keys in the following order.The “System” screen appears3. Scroll down the list.