Pioneer AVIC-8200NEX Operating Manual

Also see for AVIC-5200NEX: Installation manual Quick start guide Important information for the user Important information for the user

Contents

59Switches between the video inputand the sound input.Hides the touch panel keys.To display again the keys, touchanywhere on the screen.p A Mini-jack AV cable (CD-RM10) (sold separately) is requiredfor connection. Refer to the Installation Manual.p You can set the screen size for the video image. Refer to Changing the wide screen mode on page 74CAUTIONFor safety reasons, video images cannot be viewed while yourvehicle is in motion. To view video images, stop in a safe placeand apply the parking brake.Starting procedureYou can display the video image output by the device connectedto video input.1 Display the “System” setting screen.2 Touch [Input/Output Settings].3 Confirm that “AUX Input” is turned on.4 Display the AV source selection screen.5 Touch [AUX].Setting the video signalWhen you connect this product to an AUX equipment, select thesuitable video signal setting.The default setting is “Auto”.p You can operate this function only for the video signal inputinto the AUX input.1 Display the “Video Setup” screen.2 Touch [Video Signal Setting].3 Touch [AUX].4 Touch the item.The following items are available:Auto, PAL, NTSC, PAL-M, PAL-N, SECAM.Hides the touch panel keys.To display again the keys, touchanywhere on the screen.CAUTIONFor safety reasons, video images cannot be viewed while yourvehicle is in motion. To view video images, stop in a safe placeand apply the parking brake.Starting procedure (for AVsource)You can display the video image output by the device connectedto video input. Refer to the Installation Manual.1 Display the “System” setting screen.2 Touch [Input/Output Settings].3 Touch [AV Input].4 Touch [Source].p If “Source” is selected, “2nd Camera Input” is automaticallyset to “Off”. Refer to Setting the second camera activation on page 655 Display the AV source selection screen.AUX source AV input