En3207SectionMulti-CD PlayerPausing CD playbackPause lets you temporarily stop playback of theCD.1 Press 5 or ∞ to select PAUSE from the M-CD MENU, and press A.MENU.PAUSE ON/OFF indications are displayed.2 Press 5 to turn pause on.Pause :ON appears in the display. Play of thecurrent track pauses.3 Press ∞ to turn pause off.Pause :OFF appears in the display. Play willresume at the same point that you turned pauseon.Using compression and bassemphasisYou can use these functions only with a multi-CDplayer that supports them.Using COMP (compression) and DBE (dynamicbass emphasis) functions let you adjust thesound playback quality of the multi-CD player.Each of the functions have a two-step adjust-ment. The COMP function balances the outputof louder and softer sounds at higher volumes.DBE boosts bass levels to give playback a fullersound. Listen to each of the effects as you selectthrough them and use the one that bestenhances the playback of the track or CD thatyou are listening to.1 Press 5 or ∞ to select COMP from the M-CD MENU, and press A.MENU.COMP adjustment indications are displayed.• If the multi-CD player does not supportCOMP/DBE, NO COMP is displayed when youattempt to select it.2 Press 5 or ∞ to select your favorite setting.Press 5 or ∞ repeatedly to switch between thefollowing settings:COMP OFF—COMP 1—COMP 2—COMP OFF—DBE 1—DBE 2Using ITS playlistsITS (instant track selection) lets you make aplaylist of favorite tracks from those in the multi-CD player magazine. After you have added yourfavorite tracks to the playlist you can turn on ITSplay and play just those selections.Creating a playlist with ITS program-mingYou can use ITS to enter and playback up to 99tracks per disc, up to 100 discs (with the disctitle). (With multi-CD players sold before theCDX-P1250 and CDX-P650, up to 24 tracks canbe stored in the playlist.)When using a multi-CD player that does notfeature an ITS function, you cannot select ITSPLAY.1 Play a CD that you want to program.Press 5 or ∞ to select a CD.2 Press 5 or ∞ to select ITS MEMORY fromthe M-CD MENU, and press A.MENU.ITS MEMORY adjustment indications are dis-played.3 Select a desired track by pressing 2 or 3.4 Press 5 to store the currently playing trackin the ITS MEMORY.MEMORY is displayed briefly and the currentlyplaying selection is added to your playlist. Thedisplay then shows ITS again.
