Pioneer AVG-VDP1 Operation Manual

Also see for AVG-VDP1: Guide Operation manual Installation manual Installation manual Service manual

Checking the sensor learningstatus and the driving statusYou can check the learning status of the 3Dsensor and the driving status of a vehicle.% Touch Menu and then touchSensor Learning Status to display the sen-sor learning status.1 3527641 DistanceShows the distance driven.2 Speed PulseShows the total number of the speed pulsedetected by this unit.3 Learning StatusShows the current driving mode.4 SpeedShows the speed detected by this unit. (Thisindication may be different from the actualspeed of your vehicle, so never use this in-stead of the speedometer of your vehicle.)5 Acceleration and deceleration in for-ward direction/Rotational speedShows the acceleration and deceleration(braking) of your vehicle in a forward direc-tion. In addition, this shows rotationalspeed when your vehicle turns to left orright.6 SlopeShows the degree of slope of your vehicle.7 Degree of learningShows the learning situations of Distance(distance), Right Turn (right turn),Left Turn (left turn) and 3D (3D) detection.In addition, the length of bars shows the de-gree of learning.Resetting the learned resultsYou can reset the learned results stored inDistance, Speed Pulse or Learning Status.1 Touch Menu and then touchSensor Learning Status to display the sen-sor learning status.2 Touch any of Distance, Speed Pulse orLearning Status.Clear appears on the display.3 Touch Clear to reset the learned resultof the selected item.# To cancel resetting the result, touchCancel.Checking the VehicleDynamics Processor StatusEn26Section07