Pioneer AVG-VDP1 Operation Manual

Also see for AVG-VDP1: Guide Operation manual Installation manual Installation manual Service manual

1 GraphShows the graph of speed vs time.2 Time (TIME)Shows the current time.3 Tachometer (TACH)Shows the engine speed in revolutions perminute (rpm).4 Speedometer (SPEED)Shows your vehicle speed.5 Acceleration (ACC.G)Shows the acceleration in a forward direc-tion. The + sign indicates accelerationwhile the sign indicates deceleration(braking).Selecting gaugesYou can change the combination of gauges.! This function can be operated only whenselecting the analog mode.1 Touch Select Gauge.The touch panel keys for selecting the gaugesare displayed.# When Select Gauge is not displayed, you candisplay it by touching the screen.2 Touch the middle of a gauge that youwant to change.The cursor moves to the selected gauge.3 Touch i or j to select the gauge type.Each time you touch i or j selects thegauge types in the following order:TACH (tachometer)BATT. (voltmeter)ACC.G (accelerometer)LAT.G (lateral ac-celerometer)POWER (horsepower meter)TORQUE (torque meter)tiltmeterSPEED(speedometer)4 Touch k or l to switch among the po-sition of the gauges.5 Touch ESC to return to the normal dis-play of each mode.# To return to the previous display, touchBack.Using a peak hold functionWith this unit, the peak hold value will be auto-matically stored in memory. And you can re-call the maximum value reached for eachparameter in memory.! This function can be operated when select-ing the analog and the digital modes.1 Touch Peak Hold.The maximum value reached for each para-meter will be displayed.# When Peak Hold is not displayed, you candisplay it by touching the screen.# Since this unit is not designed to hold thepeak value for speed, N/A (not available) is dis-played in the speedometer.2 Touch the screen to display the touchpanel keys.The touch panel keys appear in the display.# To reset the peak hold value, touch Reset.# To hide the touch panel keys, touch HideKey.3 Touch ESC to return to the normal dis-play of each mode.# To return to the previous display, touch Back.NoteIn the analog mode, you can also change thecombination of gauges by touching i/j/k/l.Basic OperationsEn12Section03