2ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDSIMPORTANT SAFEGUARDSPlease Read All of These Instructions Regarding Your Displayand Retain them for Future Reference1. Read this manual fully and carefully before operating your display.2. Keep this manual handy for future reference.3. Pay close attention to all warnings in this manual and follow the instructions care-fully.4. Never allow others to use the system until they have read and understood theoperating instructions.5. Do not install the display where it may (i) obstruct the driver’s vision, (ii) impairthe performance of any of the vehicle’s operating systems or safety features,including airbags, or (iii) impair the driver’s ability to safely operate the vehicle.6. As with any accessory in your vehicle’s interior, the display should not divertyour attention from the safe operation of your vehicle. If you experience difficul-ty in operating the system or reading the display, please park safely before mak-ing adjustments.7. Do not attempt to install or service your display by yourself. Installation or ser-vicing of the display by persons without training and experience in electronicequipment and automotive accessories may be dangerous and could expose youto the risk of electric shock or other hazards.8. Please remember to wear your seat belt at all times while operating your vehicle.If you are ever in an accident, your injuries can be considerably more severe ifyour seat belt is not properly buckled.9. Use of this product is subject to any government laws regarding placement or use.PIONEER does not accept any liability for any problems, damage or loss incurredas a result of the product being used with an incorrect setting or in violation ofany government laws.10. This product is designed for use with a back-up camera. Users may connect theAV IN2 input with “REVERSE-GEAR SIGNAL INPUT” only to a back-up cam-era. Users must not connect any other devices to the AV IN2 input with“REVERSE-GEAR SIGNAL INPUT”.