Pioneer 575 - STEINER MARINE 7X50 Operating Instructions Manual

Also see for S-DV385: Operating instructions

Contents

USB playback0526EnChapter 5USB playbackUsing the USB interfaceIt is possible to listen to two-channel audio 1and watch JPEG files using the USB interfaceon the front of this unit. Connect a USB massstorage device 2 as shown below.1 With the player switched on, press USB.Make sure your TV is on and set to the correctvideo input.2 Connect your USB device.The USB terminal is located on the front panel.3 Press  (play) to start playback.If your USB device contains JPEGs, aslideshow will start. See Playing a JPEGslideshow on page 27 for more on this.• Make sure USB DATA is showing in thefront panel display (or the system is instandby) when disconnecting.ImportantIf a USB ERR message lights in the display, itmay mean that the power requirements of theUSB device are too high for this player, or thatthe device is incompatible. Try the following:• Switch the player off, then on again.• Reconnecting the USB device with theplayer switched off.• Selecting to another input source (likeDVD/CD), then back to USB.• Using a dedicated AC adapter (suppliedwith the device) for USB power.If this doesn’t remedy the problem, it is likelyyour USB device is incompatible.Basic playback controlsThe following table shows the basic controls onthe remote for USB playback.Note1 This includes playback of WMA/MP3/MPEG-4 AAC files (except files with copy-protection or restricted playback).2 • Compatible USB devices include external magnetic hard drives, portable flash memory (particularly keydrives) and digitalaudio players (MP3 players) of format FAT16/32. It is not possible to connect this unit to a personal computer for USB playback.• Pioneer cannot guarantee compatibility (operation and/or bus power) with all USB mass storage devices and assumes noresponsibility for any loss of data that may occur when connected to this unit.• With large amounts of data, it may take longer for the system to read the contents of a USB device.USB massstorage deviceUSB(Type A)Button What it does Starts normal playback. Pauses/unpauses playback. Stops playback. Press to start fast reverse scanning. Press to start fast forward scanning. Skips to the start of the current file,then previous files. Skips to the next file.