Patton electronics SL4050/10 Getting Started Manual

Also see for SL4050/10: Specification sheet Getting started guide Specification sheet Specifications Specifications

Contents

Patton electronics SL4050/10 Getting Started Manual Manual pdf 71 page image

Compliance 71SmartLink 4050 Series Getting Started Guide A • Compliance informationComplianceEMC Compliance:FCC Part 15, Class BEN55022, Class BEN55024Safety ComplianceEN60950-1Radio and TV InterferenceThe SmartLink SIP Phone generates and uses radio frequency energy, and if not installed and used properly-that is, in strict accordance with the manufacturer’s instructions-may cause interference to radio and televisionreception. The SmartLink SIP Phone have been tested and found to comply with the limits for a Class B com-puting device in accordance with specifications in Subpart B of Part 15 of FCC rules, which are designed toprovide reasonable protection from such interference in a commercial installation. However, there is no guar-antee that interference will not occur in a particular installation. If the SmartLink SIP Phone does cause inter-ference to radio or television reception, which can be determined by disconnecting the unit, the user isencouraged to try to correct the interference by one or more of the following measures: moving the computingequipment away from the receiver, re-orienting the receiving antenna and/or plugging the receiving equipmentinto a different AC outlet (such that the computing equipment and receiver are on different branches).CE notice (Declaration of Conformity)We certify that the apparatus identified in this document conforms to the requirements of Council Directive1999/5/EC on the approximation of the laws of the member states relating to Radio and TelecommunicationTerminal Equipment and the mutual recognition of their conformity.The safety advice in the documentation accompanying this product shall be obeyed. The conformity to theabove directive is indicated by the CE sign on the device.