Patton electronics SL4050/10 Getting Started Manual

Also see for SL4050/10: Specification sheet Getting started guide Specification sheet Specifications Specifications

Contents

Patton electronics SL4050/10 Getting Started Manual Manual pdf 26 page image

Setting up the VoIP SIP phone 26SmartLink 4050 Series Getting Started Guide 2 • Installing the SmartLink SIP PhoneNote You can stop the setup process at any time by pressing MENU + OK to saveany changes and exit, or by pressing MENU + CANCEL to quit withoutsaving. The phone will automatically time-out and exit the menu screen ifthere are no inputs from the user.Use left and right arrows on the control pad to select ENABLE or DISABLE.The left arrow key can also be used as a backspace key to delete characters.Display Name1. Press2. Use the numeric keypad to enter the display nameNote To type text characters, press the appropriate key on the numeric keypad (seefigure 1 on page 17). For example, to type a “z” press the 9 key until the low-ercase z appears—the displayed sequence would be:9 W X Y Z w x y z.Display NameSome Internet Service Provider (mostly ADSL) uses PPPoE which requires that the user enter an ID and apassword to access the Internet. In this case, enable ADSL DIALUP and enter the PPPoE ID andPPPoE password.ENABLE ADSL dialup1. Press2. Use to select ENABLE3. Press4. Enter the ADSL ID5. Press6. Enter the ADSL password