Patton electronics Patton SmartLink M-ATA Getting Started Manual

Contents

Patton electronics Patton SmartLink M-ATA Getting Started Manual Manual pdf 30 page image

Settings 30SmartLink M-ATA Getting Started Guide 4 • Network—LANThe DNS server used for registration is operated by Dynamic Network Services, Inc., Dynamic DNS(DynDNS). You can find detailed information about the company and the services it offers on the webpagewww.dyndns.org. The company offers different levels of service. The basic services are offered free of charge,while the more advanced services are fee-based.Figure 7. Dynamic DNS Service windowConfiguring Dynamic DNS1. Select System > Configuration.2. Choose Sever: To enable DynamicDNS, select the name of the DYNDNS service from the drop-down menu (see figure 7).3. Host Name: The host name is the name of the SL4020 as registered on the DYNDNS service.4. Username: The user name is the user name as registered on the Dynamic DNS service.5. Password: The password is the password as registered on the Dynamic DNS service.MAC Spoofing ConfigurationFigure 8. MAC Spoofing Configuration section of the Settings windowWAN MAC Address (Spoofed)Only available when the unit is using the M-ATA mode. The spoofed MAC address to be used by the device’sLAN interfaces, the Ethernet address of the outgoing packets from the LAN interface would be replaced withthis address. If blank, the LAN interfaces will use the hardware value of MACVLAN ConfigurationThe SmartLink M-ATA can mark outgoing Ethernet frames on the LAN interface with VLAN and prioritytags. Other devices on the LAN can use the tags to control how frames from the SmartLink M-ATA are pro-