Panasonic viera th-l32x20a Operating Instructions Manual

Also see for TH-L32X20A: Operating instructions

Panasonic viera th-l32x20a Operating Instructions Manual Manual pdf 54 page image

54FAQsProblem ActionsDigital TVPicture regularly pixelateson some channels, or‘No Signal’ messageCheck “Signal Condition” via TV Setup menu. If “Signal● Quality” or “Signal Strength” are red/orange or constantlychanging, check aerial/cable/connections. If problempersists consult your local TV antenna installer.Too much signal; is “Signal Strength” always at full strength?● If yes, try attenuating (reducing) the signal strengthCheck that the aerial and antenna cable are designed for● DTV reception.The received signal may be too weak to allow the TV to● reliably lock to the selected channel to generate a viewablepicture. If problem persists consult your local TV aerialinstaller.Interference from household appliances (known as impulse● noise) such as light switches, fridges etc may cause picturebreak up and / or audio distortion. Use high quality quadshielded coaxial cable (RG6Q) fly lead between TV andantenna wall socket to minimise impulse noise pickup. Ifproblem persists consult your local TV aerial installer.Antenna installation may be using an aerial amplifier that is● faulty or an older style aerial amplifier that was not designedfor digital TV.Older style antenna cabling, loose fitting/corroded wall● socket connections/terminals etc.Picture infrequentlypixelates on some or allchannelsElectrical interference caused by local or distant lighting● storms, heavy rain, high wind etc may cause picture tobreak up and or audio to mute/distort momentarily.Impulse noise interference from an infrequently used● electrical appliance, or a passing vehicle or lawn mower witha “noisy” ignition system.Older style antenna cabling, loose fitting/corroded wall● socket connections/terminals etc.OtherTV goes into StandbymodeAuto power function is activated.● The TV enters Standby mode about 30 mins. after analogue● broadcasting ends.The remote control doesnot work or is intermittentAre the batteries installed correctly? (p. 3)● Has the TV been switched On?● Point the remote control directly at the front of the TV (within● about 7 m and a 30 degree angle of the front of the TV).Situate the TV away from sunshine or other sources of● bright light not to shine on the TV’s remote control signalreceiver.LicenceVGA is a trademark of International Business Machines Corporation.● S-VGA is a registered trademark of the Video Electronics Standard Association.● SDXC Logo is a trademark of SD-3C, LLC.● HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered● trademarks of HDMI Licensing LLC in the United States and other countries.HDAVI Control● TM is a trademark of Panasonic Corporation.“AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and Sony Corporation.● Manufactured under license from Dolby Laboratories.● Dolby and the double-D symbol are trademarks of Dolby Laboratories.Macintosh is a trademark of Apple Inc.●Even if no special notation has been made of company or product trademarks, these trademarks havebeen fully respected.

/ 56

Related manuals for Panasonic TH-L32X20A