Panasonic lh1760 Operating Instructions Manual

Panasonic lh1760 Operating Instructions Manual Manual pdf 11 page image

11Three types of information are displayed on the screen. The input signal status, picture adjusting knob status, andthe menu display.When using an external DC power connection, a “LOW VOLTAGE” warning may be displayed (J page 28). Thedisplay position is the same as the “Input signal status”.1. The selected input line (J page 8, )• VIDEO, Y/C, SDI1, SDI2,YPBP R/RGB-VIDEO/RGB-COMP.2. Signal format• The display status can be set in “STATUSDISPLAY” in the “SYSTEM CONFIG” menu(J page 19).• If “UNSUPPORT SIGNAL” is displayed, then eitherthe current input signal is not supported or the“INPUT SELECT” menu setting needs to bechanged.• When “NO SIGNAL” is displayed, there is no inputsignal.Note:“UNSUPPORT SIGNAL” and “NO SIGNAL” may not bedisplayed correctly.Picture adjusting knob (J page 8, )• This knob can be rotated and pushed.• The status display appears when the knob ispushed.The display disappears when the knob is pushedagain, or if the knob is not operated for 10 seconds.• Settings can only be adjusted in the status display.• The display position can be changed (J page 19“ROTARY POSITION”).Status display:PHASE, CHROMA, BRIGHT, CONTRASTNote:The volume knob status display is not displayed on thescreen.• This is displayed when the menu is used.• The display disappears if remains idle for 2 minutes.• The display position can be changed (J page 19“MENU POSITION”).Input signal status1Picture adjusting knob statusMenu displayMENUDisplays the operation explanation for themenu button.How to Use the On Screen Menu