Panasonic WV-SW559 Installation Manual

Also see for WV-SW558: Integration note Product catalog Operating instructions Specification Installation guide

Panasonic WV-SW559 Installation Manual Manual pdf 43 page image

43Configure the network settings of the camera using thePanasonic IP setting softwareIt is possible to perform the network settings of the camera using the IP setup software on the pro-vided CD-ROM. When using multiple cameras, it is necessary to configure the network settings ofeach camera independently.If the Panasonic IP setting software does not work, configure the network settings of the cameraand the PC individually on the "Network" page of the setup menu. Refer to the OperatingInstructions (included in the CD-ROM) for further information.IMPORTANT:• When using Microsoft Windows 7 or Microsoft Windows Vista, the "Windows Security Alert"window may be displayed when starting the IP setup software. In this case, disable "UserAccount Control" from the control panel.• For the security enhancement, the MAC address/IP address of the camera to be configured willnot be displayed when around 20 minutes have passed after turning on the power of the cam-era. (When the effective period is set to "20min" in the IP setup)However cameras in the initial set mode are still displayed even after 20 minutes.• Panasonic IP setting software is inoperable in other subnets via the same router.• This camera cannot be displayed or set with an older version of the IP setup software (version 2.xx).z To start the Panasonic IP setting software, click the [Run] button next to [IP Setting Software]from the CD launcher menu window, or double-click on the shortcut icon created after install-ing the software on the PC.• The License Agreement will be displayed. Read the Agreement and choose "I accept the termin the license agreement", and click [OK].x Click the [Network Settings] button after select-ing the MAC address/IP address of the camerato be configured.Note:• When using a DHCP server, the IP address assigned to the camera can be displayed by click-ing the [Search] button of the IP setting software.• When a duplicate IP address is used, the corresponding camera number will be displayedshaded.• When the [Access Camera] button is clicked, live images of the selected camera will be dis-played.• It is possible to change the "Camera list" display between IPv4 addresses and IPv6 addressesin accordance with the protocol in use.• The information displayed can be sorted by clicking the title of each displayed item.Configure the network settings