32Click the [Execute] button of "Access img.".→ The user authentication window will be displayed.Step 2Click the [OK] button after entering the user name andthe password.→ The folder in which images are to be saved will bedisplayed.Access copy images saved on the SD memory card onto the PC [SDmemory card images]Click the [SD memory card] tab on the "Basic" page. (☞ Pages 22 and 23 How to display/operate the setup menu)The following are descriptions of how to copy images saved on the SD memory card onto the PC. It is necessary inadvance to select "Allow" for "FTP access to camera" on the [Network] tab of the "Network" page. (☞ Page 79)Important:• It may sometimes be impossible to operate when another user is accessing images on the SD memory card. Inthis case, retry later.• Depending on the settings of a proxy server or a firewall, images may not be obtained via a network. In thiscase, refer to the network administrator.Step 1• After formatting the SD memory card, available sizemay be smaller than the total size since the defaultdirectory is automatically created in the SD memorycard.• Recommended SD memory cardManufactured by Panasonic (option)SDHC memory card:4 GB, 8 GB, 16 GB, 32 GBSD memory card:256 MB, 512 MB, 1 GB, 2 GB(except miniSD card and microSD card)• Use a SD memory card formatted compliant withthe SD memory card standard at the default.■ SD memory card images[Access img.]Images on the SD memory card can be obtained.Note:• When logging in the camera to access images, driveB will be displayed first.Images are saved in different directories accordingto "Save trigger".Move to the directory corresponding to the desiredimages and copy them.Refer to page 101 for further information about thedirectory structure.
