31[Max bit rate]Select the bit rate for images to be recorded from the fol-lowing.64kbps/ 128kbps/ 256kbps/ 384kbps/ 512kbps/768kbps/ 1024kbps/ 1536kbps/ 2048kbps/3072kbps/ 4096kbpsDefault: 1536kbps[Image quality]Select the quality for H.264 images to be recorded fromthe following.Fine(Image quality priority)/ Normal/Low(Motion priority)Default: NormalNote:• When "Constant bit rate" is selected for "Recordingpriority", this setting is available.[Refresh interval]Select an interval (I-frame interval; 0.2 - 1 second) torefresh the H.264 images to be recorded from the follow-ing.0.2s/ 0.33s/ 0.5s/ 1sDefault: 1s■ SD memory card information[Remaining capacity]Total capacity and remaining capacity of the SD mem-ory card will be displayed.Depending on the status of the SD memory card, thesize indications will differ as follows.Indication Description--------KB/--------KB No SD memory card isinserted.Failed to obtain avail-able capacity due to error, etc.********KB/********KB The SD card memory is unfor-matted, or locked, etc.Note:• When "Off" is selected for "Overwrite" and the avail-able size of the SD memory card has reached"0 KB", images will not be saved on the SD memorycard. When the notification function is on, a notifica-tion mail will be sent to the registered addresseswhen the SD memory card becomes full. (☞ Pages67 and 68)[Format]To format the SD memory card, click the [Execute] but-ton.Important:• Before formatting the SD memory card, it is neces-sary to select "Use" for "SD memory card" on the[SD memory card] tab of the "Basic" page (☞ page28) and "Off" for "FTP periodic image transmission"on the [FTP img. trans.] tab of the "Network" page(☞ page 83).• Use the SD memory card after formatting it usingthe [SD memory card] tab.If using the SD memory card that has not been for-matted on the [SD memory card] tab, the followingfunctions may not work correctly.• Save/obtain images that failed to transmit to theFTP server using the FTP periodic image trans-mission function• Save/obtain alarm images• Save/obtain images saved manually• Save/obtain the alarm logs, the manual logs, theFTP error logs and the system logs• Save/obtain images recorded using the SDmemory recording function of Panasonic's net-work disk recorder.• Play/download images on the SD memory card• When an SD memory card is formatted whileanother user is in operation, the operation will becanceled.• It is impossible to access the SD memory card dur-ing the process of formatting.• All data saved on the SD memory card will bedeleted when the SD memory card is formatted.• Do not turn off the power of the camera during theprocess of formatting.• When the setting of "Save trigger" has beenchanged, it is recommended to format the SD mem-ory card.
