The alteration detection settings will be configured in the following procedure.Generation of the CRT key (encryption key)Configuration of the additional info for detecting alterationApplication for the approval by CA(Certificate Authority) - Issue of the certificateGeneration of CSR (Certificate Signing Request)Installation of the certificateGeneration of the self-signed certificateWhen using the certificate issued by CAWhen using the self-signed certificate10.5.1 Generation of the CRT key (encryption key)IMPORTANT• When the self-signed certificate or certificate (security certificate) issued by CA is valid, it is impossibleto generate the CRT key.• When the certificate (security certificate) issued by CA is used, the available key size varies dependingon the CA. Check the available key size in advance.• To generate the CRT key, it may take about 2 minutes. Do not operate the web browser until thegeneration of CRT key is complete. While the CRT key is being generated, the refresh interval and linespeed may be lower.1. Click the [Execute] button of “CRT key generate”.→ The “CRT key generate” dialog box will be displayed.2. Click the [Execute] button.→ The generation of CRT key will be started. When the generation is finished, the key size and generationtime & date of the generated key will be displayed on “Current CRT key”.Operating Instructions 6110 Configure the basic settings of the camera [Basic]