Panasonic WV-SFV130 Operating Instructions Manual

Also see for WV-SFN110: Operating instructions Installation guide

Contents

Panasonic WV-SFV130 Operating Instructions Manual Manual pdf 117 page image

3. Adjust the “Mic input volume (Camera to PC)” on the [Audio] tab of the “Image/Audio” page as necessary.(®page 100)→ The settings and the actual audio detection status are displayed on the bottom of the screen. If thevolume level goes above the audio detection level, a red bar, which indicates that sound has beendetected, is displayed.If further adjustments are required, repeat from step 2.Note• “Audio detection” can only be used when “Mic input” is selected for “Audio transmission/reception” onthe [Audio] tab of the “Image/Audio” page. (®page 100)• Noise or other unwanted sound from the surrounding area may be mistakenly detected.• Only the volume of the sound determines whether sound is detected or not, the type of sound doesnot matter.13.5 Configuration of the settings relating to alarmnotification [Notification]Click the [Notification] tab on the “Alarm” page. (®page 38, page 40)The settings relating to Panasonic alarm protocol and HTTP alarm notification can be configured in this section.Operating Instructions 11713 Configure the alarm settings [Alarm]