Panasonic WV-SF330 Series Operating Instructions Manual

Also see for WV-NP502: Product catalog Integration note Product catalog Comparison chart Operating instructions

Contents

Panasonic WV-SF330 Series Operating Instructions Manual Manual pdf 179 page image

IMPORTANT• When the HTTPS port number is changed from “443”, enter “https://IP address of the camera + :(colon) + port number” in the address box of the browser.(Example: https://192.168.0.11:61443)• When the camera is in a local network, configure the proxy server setting of the web browser (under[Internet Options...] under [Tools] of the menu bar) to bypass the proxy server for the local address.3. Press the [Enter] key on the keyboard.→ The “Live” page will be displayed.When the security alert window is displayed, install the security certificate. (®page 179)When “On” is selected for “User auth.”, the authentication window will be displayed before displayinglive images for the user name and password entries.IMPORTANT• When the camera is accessed using the HTTPS protocol, the refresh interval and frame rate ofimages may be lower.17.3.1 Install the security certificateWhen the security certificate of the camera to access is not installed on the PC, the security alert window willbe displayed each time the camera is accessed using the HTTPS protocol. To have the security alert windownot displayed, it is necessary to install the security certificate in the following procedure. If the certificate is notinstalled, the alert window will be displayed each time the camera is accessed.Note• The security certificate is installed on the PC with the information registered for “Common Name”.Therefore, the information registered for “Common Name” must be same as the address or host namefor the camera access. If the certificate is not the same, the security alert window will be displayedeach time the camera is accessed.• When the address or host name of the camera is changed, the security alert window will be displayedeach time the camera is accessed even if the security certificate is installed. Install the securitycertificate again.• When the camera access is open to the Internet, enter the address name or host name to access viathe Internet for “Common Name”. In this case, the security alert window will be displayed each timethe camera is locally accessed, even if the security certificate is installed.• When the security certificate is properly installed, a key icon is displayed in the address box of the webbrowser that has accessed the camera. (When using Internet Explorer 7, Internet Explorer 8, InternetExplorer 9 or Internet Explorer 10 )When using Internet Explorer 7, Internet Explorer 8, Internet Explorer 9 orInternet Explorer 10• When using Internet Explorer 10, note that some of the displayed windows may differ from the followingdescriptions.1. Access the camera using the HTTPS protocol.Operating Instructions 17917 Configuring the network settings [Network]