26Installing the manualsOn the CD launcher window, click the [Install] button next to [Manual] to display the Manual installa-tion window. Confirm the following settings before starting the installation.qewtrq Select which manuals to install. The camera models that the manuals support are displayed inw "Supported Camera Models".w The camera models that are supported by the manuals selected in q are displayed here.e Select where to create the manuals shortcut icon when the manuals are installed.r Specify which folder on the PC to install the manuals to.t Click the [Install] button to start the installation.Installing the Viewer softwareThe Viewer software (Network Camera View4S) must be installed on the PC in order to displaycamera images. On the CD launcher window, click the [Install] button next to [Viewer Software],and follow the instructions displayed on the window to install the software. A message is displayedif a PC that does not have the Viewer software installed tries to access the camera. Install the soft-ware by following the instructions displayed on the window. Refer to "Viewer software" in theOperating Instructions for further information.