Panasonic WV-NS202 Network Operating Instructions

Also see for WV-NS202 - i-Pro Network Camera: Integration note Network operating instructions Instructions

Contents

Panasonic WV-NS202 Network Operating Instructions Manual pdf 19 page image

19Configure the basic settings of the camera [Basic setup]The basic settings such as time and date and camera name, and the settings relating to the NTP server and the SDmemory card can be configured on the "Basic setup" page.The "Basic setup" page has 3 tabs; the [Basic] tab, the [NTP] tab and the [SD memory card] tab.Configure the basic settings [Basic]Click the [Basic] tab on the "Basic setup" page. ( page 15)The settings such as the camera name, time and date, etc. can be configured on this page.[Camera title]Enter the title of the camera. Click the [SET] button afterentering the title of the camera. The entered title will bedisplayed in the status display area.Number of characters for the camera title: 0 - 20charactersDefault: WV-NS202[Time & date setup]Enter the current time and date. When "12-hours" isselected for "Time display", "AM" or "PM" can be select-ed.Available range: 01/01/2006 0:00:00 –12/31/2035 23:59:59[Time display]Select the time display format from "12-hours", "24-hours" and "OFF". Enter the current hour reflecting thissetting when entering the current time and date for"Time & date setup". To hide time and date, select"OFF".Default: 24-hours[Date/time display format]Select a date/time display format.When "06/04/01 13:10:00" is set for "Time & date setup"after selecting "24-hours" for "Time display", time anddate will be respectively displayed as follows.DD/MM/YYYY: 01/04/2006 13:10MM/DD/YYYY: 04/01/2006 13:10DD/Mmm/YYYY: 01/Apr/2006 13:10YYYY/MM/DD: 2006/04/01 13:10Mmm/DD/YYYY: Apr/01/2006 13:10Default: MM/DD/YYYY[Daylight saving (Summertime)]Select "ON" or "OFF" to determine whether or not toapply daylight saving time. Select "ON" or "OFF" todetermine whether or not to apply daylight saving time.ON: Applies summer time. An asterisk (*) will be dis-played on the left side of the displayed time anddate.OFF: Does not apply summer time.Default: OFF[Link/Access LED]Select "ON" or "OFF" to determine whether or not tolight the link LED, the access LED, the SD memory carderror LED and the power LED.Select "ON" to check the operational status by lightingthe LEDs. Select "OFF" to turn off the LEDs at all times.Default: ONNotes:• Link LED: This LED will light when communicationwith the connected device is available.• Access LED: This LED will light when accessing anetwork.