Panasonic WV-NS202 Network Operating Instructions

Also see for WV-NS202 - i-Pro Network Camera: Integration note Network operating instructions Instructions

Contents

Panasonic WV-NS202 Network Operating Instructions Manual pdf 20 page image

20• SD memory card error LED: This LED will lightwhen the SD memory card is unavailable to saveimages.• Power LED: This LED will light when the power ison.[OSD Position]Select a position where time and date, camera title, pre-set ID, panning/tilting angle, zoom ratio are to be dis-played on the "Live" page.Upper left: The above information will be displayed atthe upper left corner of the main area on the "Live"page.Lower left: The above information will be displayed atthe lower left corner of the main area on the "Live"page.Upper right: The above information will be displayed atthe upper right corner of the main area on the "Live"page.Lower right: The above information will be displayed atthe lower right corner of the main area on the "Live"page.Default: Upper left[Alarm status update mode]Select an interval of the camera status notification fromthe following.When the status of the camera changes, the alarmoccurrence indication button, the receiver button, thetransmission button, the AUX button or the SD savingstatus indication button will be displayed to notify of thecamera status.Polling (30 sec): Updates the status each 30 secondsand provide notification of the camera status.Real time: Provide notification of the camera statuswhen the status has changed.Default: Real timeImportant:When using Windows ® 2000 Professional SP4, evenwhen "Real time" is selected, the actual interval willbe 30 seconds. This is a normal operation.Note:Depending on the network environment, notificationmay not be provided in real time.[Alarm status port]When selecting "real time" for "Alarm status updatemode", designate a port number to which the statuschange notification is to be sent.Available port number: 1 - 65535Default: 31004[Automatic installation of Viewer software]Determine whether or not to install the viewer softwarefrom this camera.ON: Installs the viewer software from the camera auto-matically.OFF: The viewer software cannot be installed from thecamera.Default: ONImportant:• It is impossible to display images and to receive/transmit audio between the camera and the PCwhen the viewer software "Network Camera View3"is not installed on the PC.• The number of the viewer software installations canbe checked on the [Upgrade] tab of the"Maintenance" page.