Panasonic WV-NM100 Operating Instructions Manual

Also see for WVNM100 - NETWORK COLOR CAMERA: Quick reference guide Brochure & specs Operating instructions

Contents

Panasonic WV-NM100 Operating Instructions Manual Manual pdf 13 page image

13Setup with the Provided "Panasonic IP Setup" SoftwareSet up the network of the camera by using the "Panasonic IP Setup" software included on the CD-ROM providedwith the camera.The "Panasonic IP Setup" starts up.The MAC address and the IP address of the connected camerawill be displayed. (Click the [REFRESH] button if they are not dis-played.)Screenshot 2Click the MAC address/IP address of the cam-era to be set up.Click the [NETWORK SETUP] button.• When two or more cameras are connected,the MAC addresses and the IP addresses ofall the connected cameras will be displayed.• The "Panasonic IP Setup" software can rec-ognize only those cameras in the same sub-net.• The updated MAC addresses and IPaddresses of all the connected cameras thatare in the same subnet will be displayed bypressing the [REFRESH] button.NotesSTEP3STEP2When the provided CD-ROM is inserted into theCD-ROM drive of the PC, the launcher softwarestarts up and the readme file is displayed.Items included in the software• SETUP• Instructions• MPEG-4 Installation• Recorder software InstallationAfter reading the readme file, click the [SETUP]button.• Double click "launch.exe" on the providedCD-ROM if the launcher software does notstart up automatically.• If a firewall (including software) exists, allowaccess to all UDP ports. Otherwise, it isimpossible to use the "Panasonic IP Setup"software.NotesSTEP1Screenshot 1