Panasonic WV-NF284 Network Operating Instructions

Also see for WV-NF284 - i-Pro Network Camera: Product catalog Integration note Brochure Reference Comparison chart

Contents

Panasonic WV-NF284 Network Operating Instructions Manual pdf 21 page image

21Configure the settings relating to images and audio [Camerasetup]The settings relating images and audio such as brightness and image quality of JPEG/MPEG-4 can configured onthis page.The "Camera setup" page has 3 tabs of the [JPEG/MPEG-4] tab, the [Camera] tab and the [Audio] tab.Configure the settings relating to JPEG/MPEG-4 images [JPEG/MPEG-4]Click the [JPEG/MPEG-4] tab on the "Camera setup" page. (☞ page 15)■ JPEG setupConfigure the settings such as "Refresh interval (JPEG)", "Image capture size" and "Image quality" on this page.Refer to page 22 for further information about the settings relating to MPEG-4 images.[Refresh interval (JPEG)*]Select an interval to refresh the displayed JPEG imagefrom the following.0.1 fps/0.2 fps/0.33 fps/0.5 fps/1 fps/2 fps/3 fps/5 fps/6 fps */10 fps */15 fps */30 fps *Default setting: 5 fpsNote:When "ON" is selected for "MPEG-4 transmission",the refresh intervals may be longer than the setvalue when the setting value with an asterisk (*) onthe right is selected.[Image capture size]Select "QVGA" or "VGA" for the image capture size ofJPEG images.Default setting: VGA[Image quality]Select image quality of JPEG images from the following.0 Super fine/1 Fine/2/3/4/5 Normal/6/7/8/9 LowDefault setting: 5 Normal