Panasonic WV-LC1700 Operating Instructions Manual

Panasonic WV-LC1700 Operating Instructions Manual Manual pdf 15 page image

15Audio Volume ControlVideo Adjustment and SetupBy pressing the + or – button during picture display, you can adjust the audio volume level. While the + or – button is pressed,the volume level is displayed on the screen.–: Audio volume level goes down.+: Audio volume level goes up. Video Adjustment (Video Input,S-Video Input)Setup of this monitor will be performed in the VIDEOADJUST menu.Note:• The menu title display differs depending on the selectedinput signal. Before adjustment, press the INPUTSELECT button surely to select the input signal. (Refer top. 13.)• If the power is shut down during setup, the setting val-ues will not be saved.1. Press the MENU button. The top menu will be displayed.2. Move the cursor to VIDEO ADJUST by pressing the C orD button. Press the MENU button.The VIDEO ADJUST menu will be displayed.Present input signals are displayed in the menu title.For video input (A): VIDEO AFor video input (B): VIDEO BFor S-video input: S-VIDEOTo the right side of the menu title, the input signal type isdisplayed as specified below.NTSC: When a video signal input of the NTSC system isentered or if there is no signalPAL: When a video signal input of the PAL system isenteredSetting item Effect Setting valueVOLUME +: Audio volume level goes up.–: Audio volume level goes down.0 to +40V I D E O A D J U S TP C S E T U PL A N G U A G EE X I TBRIGHTNESSCONTRASTSHARPNESSCOLORTINTH-POSITIONCOLOR TEMPSCANNORMAL SETTINGSEXITVIDEO B IN NTSC6500KFULL000000000000VOLUME 22