Panasonic WV-LC1700 Operating Instructions Manual

Also see for WV-LC1700: Product catalog Specifications Operating instructions

Contents

Panasonic WV-LC1700 Operating Instructions Manual Manual pdf 17 page image

173. Move the cursor to the following setting items by pressing the C or D button. Then, adjust the levels by pressing the + or– button. Video Adjustment (PC InputConnector)Adjustment of this monitor will be performed in the VIDEOADJUST menu.Note: The menu title display differs depending on theselected input signal. Before adjustment, press theINPUT SELECT button surely to select the input signal.( Page 8)1. Move the cursor to VIDEO ADJUST by pressing the Cor D button. Press the MENU button. The VIDEOADJUST menu will be displayed.Present input signals are displayed in the menu title.For PC input: PC INAccording to the timing data table ( Page 9), presentsignals are displayed in the following position of themenu title in the format of [Resolution@Refresh rate(Vertical frequency)].V I D E O A D J U S TP C S E T U PL A N G U A G EE X I TBRIGHTNESSCONTRASTCOLOR TEMPUSER COLOR-RUSER COLOR-GUSER COLOR-BNORMAL SETTINGSEXITPC IN 1280 x 1024@60 HzSetting item Effect Setting valueBRIGHTNESSCONTRAST +: Contrast level goes up.–: Contrast level goes down.– 20 to + 20COLOR TEMP 6500K: Red is intensified(default).9300K: Blue is intensified.USER: User colors (R/G/B) areadjustable.USER COLOR-R +: Red density level goes up.–: Red density level goes down.– 20 to + 20USER COLOR-G +: Green density level goes up.–: Green density level goes down.– 20 to + 20USER COLOR-B +: Blue density level goes up.–: Blue density level goes down.– 20 to + 20+: Brightness level goes up.–: Brightness level goes down.– 20 to + 20Note: USER COLOR-R, USER COLOR-G, and USER COLOR-B can be adjusted only if USER has been chosen for COLORTEMP.4. To reset the settings, move the cursor to NORMAL SETTINGS by pressing the C or D button. Press the MENU button.The currently displayed input signal (PC input) will be reset to the factory default.5. Select EXIT, and press the MENU button. The top menu will be displayed.6. Select EXIT on the top menu, and press the MENU button. The monitor display return to the default status.Note: If no operation has been performed for 10 seconds or more, the monitor display returns to the default status.