Panasonic WV-LC1700 Operating Instructions Manual

Also see for WV-LC1700: Product catalog Specifications Operating instructions

Contents

Panasonic WV-LC1700 Operating Instructions Manual Manual pdf 14 page image

14Before operation, check the connections between monitorsand external devices (cameras, digital disk recorders, etc.)(Refer to p. 12)1. Press the power button. The monitor will be poweredon, and the power indicator will light up in green.2. Press the INPUT SELECT button.Every pressing this button can change input signals asfollows.The signal name will be displayed on the upper rightcorner of screen for 3 seconds.Notes:• When no input signal is supplied to the monitor, "NOSIGNAL" will be displayed on the screen."NO SIGNAL" will continue to be displayed until an inputsignal is supplied.• When the loss of input signal is detected due to cabledisconnection, etc., "VIDEO LOSS" will be displayed onthe screen."VIDEO LOSS" will continue to be displayed until acable is connected.• When the PC input signal is selected and picture dis-play position is not proper, perform the output setting ofthe connected PC. (Refer to the diagram in p. 9.)Power-OnSignal name Input signal typeVIDEO A Composite video AVIDEO B Composite video BS-VIDEO S-videoPC PC (Analog RGB)VIDEO AVIDEO B/S-VIDEOPC