Panasonic WV-CW864A Operating Instructions Manual

Also see for WVCW864A - DOME CAMERA: Operating instructions

Panasonic WV-CW864A Operating Instructions Manual Manual pdf 17 page image

SETTING PROCEDURESThe following setting procedures are described on theassumption that this model is used in combination withWJ-SX550C Matrix Switcher and WV-CU550C/CJSystem Controller. In case a controller other than WV-CU550C is used, refer to the table on page 12.■ Menu Display● Setup Menu DisplayWV-CU550C/CJ1. Select the number of the camera you want to set upand a monitor to display SET UP MENU.2. Display the D4 menu on the LCD by pressing theappropriate direction buttons.3. Press the F1 button.SET UP MENU appears on the monitor.4. To close SET UP MENU, press the F4 button.WV-CU360C/CJPress the CAM SETUP key for 2 seconds or more toopen the SETUP menu.WV-CU161CPress the CAMERA SETUP key for 2 seconds ormore to open the SETUP menu.WV-RM701. Turn the MODE SELECTION switch to the NORMALor ALARM OFF position.2. Press the PROG switch for 2 seconds or more toopen the Program menu.3. Move the cursor to Camera Set Up Menu, and pressthe SET switch to open SETUP MENU.● Submenu DisplayThe items marked O can be selected/changed on thesubmenu.• Move the cursor to an item with the O mark andpress the CAM (SET) key. The submenu appears.-17-F1F1 F2 F3 F4Camera Set Up MenuRes A.Res ExitF2 F3 F4Camera Set Up MenuOn Exit** SET UP MENU **PRESET 1MAPHOME POSITIONSELF RETURNAUTO MODEAUTO PAN KEYDIGITAL FLIPSPECIAL1CAMERARS485 SET UPPASSWORD LOCK OFFOFFOFFOFFAUTO PANON** RS485 SET UP **UNIT NUMBERSUB ADDRESSBAUD RATEDATA BITPARITY CHECKSTOP BITXON/XOFFWAIT TIMEALARM DATADELAY TIMERET1-----192008NONE1NOT USEOFFAUTO2---