Panasonic WV-CW504S Installation Manual

Also see for WV-CW504F: Product catalog Operating instructions Specifications

Panasonic WV-CW504S Installation Manual Manual pdf 39 page image

39Specifications• BasicPower source: 24 V AC 60 Hz, 12 V DCPower consumption: 24 V AC: 3.4 W (without heater unit)14 W (with heater unit)12 V DC: 280 mA*Ambient operating temperature: –10 °C to +50 °C {+14 °F to +122 °F}–30 °C to +50 °C {–22 °F to +122 °F}**Ambient operating humidity: Less than 90 % (no condensation)Water resistance: Camera: IEC60529 (IP66)***Shock resistance: 50J, IEC60068-2-75Video output: VBS: 1.0 V [p-p]/75 Ω, NTSC, BNC connectorDimensions: WV-CW504F: ø154 mm x 145.5 mm (H){ø6-1/16" x 5-3/4" (H)}WV-CW504S: ø164 mm x 146 mm (H), 191.5 mm (Base Cover){ø6-7/16" x 5-3/4" (H), 7-9/16" (W)} (Base Cover)Weight: Main body: 1.35 kg {2.98 lbs.}(including camera attachment 100 g {0.22 lbs.})Mounting bracket(only for WV-CW 504S, WV-504SK): 350 g {0.78 lbs.}Finish: Main body: Aluminum die cast, light grayDome cover: Clear polycarbonate resin* When using 12 V DC power supply, the optional heater unit is unavailable.** With heater unit WV-CW5H (option)*** Applicable only when the installation and waterproof process are done properly.• CameraImage sensor: 1/3 inch interline transfer CCDEffective pixels: 976 (H) x 494 (V)Scanning area: 4.8 mm (H) × 3.6 mm (V) {3/16" x 5/32"}Scanning system: 2:1 interlaceScanning frequency: Horizontal: 15.734 kHz Vertical: 59.94 HzSynchronization: INT (internal sync)/VD2/LL* (Power supply synchronization)* Phase adjustableResolution: Horizontal: 650 TV lines typ. (color mode)700 TV lines or more (BW mode),Vertical: 350 TV lines or more (at center)Minimum illumination: When using clear dome cover:Color Mode: 0.1 lx {0.01 footcandle} at F1.4 WIDE0.003 lx {0.0003 footcandle} (sensitivity up x32,at F1.4 WIDE)*BW mode: 0.01 lx {0.001 footcandle} at F1.4 WIDE0.0003 lx {0.00003 footcandle} (sensitivity upx32, at F1.4 WIDE)*When using smoke dome cover (option):